SKU: 1521094585

borg 5s rx stack 60r 4 in 1 esc

$101.52 $112.80
Save 10%
No.2 Bestseller on nasasuma.com >

Pay in installments of $28.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 15 - Aug 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

borg 5s rx stack 60r 4 in 1 escVorstellung der brandneuen Borg Serie Leistung trifft Przision! Der Borg 5S RX FC Flight Controller ist speziell fr Racing FPV entwickelt und bietet unvergleichliche Leistung. Dieser innovative Controller verfgt ber einen eingebauten ELRS 2. 4GHz Empfnger und eine integrierte Antenne, die eine zuverlssige Verbindung und verbesserte Kontrolle whrend Ihrer Flge gewhrleisten. Zustzlich bietet der Borg 5S RX FC die Flexibilitt, externe Empfnger zu

Vorstellung der brandneuen Borg-Serie – Leistung trifft Präzision!

Der Borg 5S RX FC Flight Controller ist speziell für Racing FPV entwickelt und bietet unvergleichliche Leistung. Dieser innovative Controller verfügt über einen eingebauten ELRS 2.4GHz Empfänger und eine integrierte Antenne, die eine zuverlässige Verbindung und verbesserte Kontrolle während Ihrer Flüge gewährleisten. 

Zusätzlich bietet der Borg 5S RX FC die Flexibilität, externe Empfänger zu unterstützen, sodass Sie Ihr Setup individuell an Ihre Rennbedürfnisse anpassen können. Steigern Sie Ihr Rennerlebnis mit der Spitzentechnologie der Borg-Serie!

 

Änderungsprotokoll

9. April 2025: Abmessungen geändert von 34*28,5mm auf 34*27mm.

 

FC-Funktionen

Eingebauter ELRS 2.4GHz Empfänger, gleichzeitig kompatibel mit externen Antennen für erhöhte Flexibilität.

Unterstützt 4S bis 8S Batterieeingänge und bietet Vielseitigkeit für verschiedene Renn-Setups.  

Integrierter 12V BEC liefert stabile Energie für Ihr VTX-System und ermöglicht die Fernsteuerung zum Ein- und Ausschalten.  

FPC-Kabel sorgen für sichere Verbindungen mit ESCs, während SH1.0-Stecker die Zuverlässigkeit aller anderen Schnittstellen verbessern.

FC-Spezifikationen

Eingangsspannung: 4-8S; Unterstützt LIHV-Akkus

MCU: AT32F435RGT7

Gyro: ICM42688

Barometer: N/A

OSD-Chip: AT7456E

Flash: 16MB (Blackbox-Flash)

UARTS: 4

Motor-Ausgänge: 4

I2C seriell: Nicht unterstützt

VTX-Protokoll: unterstützt DJI MSP/Smartaudio/IRCTramp/HDZero

LED-Controller: Ja

Summer-Pad: Ja

Firmware-Ziel: IFLIGHT_BLITZ_ATF435(Betaflight)

Montagemuster: 20*20φ4

Abmessungen: 34*27mm±1

Gewicht: 6,8g±1

BEC: 5V 2,5A, 12V 2A (12V mit VTX-Schalter)

 

Verdrahtungsvorschlag

UART 1 für VTX HD / Analog

UART 2 für ESC-Telemetrie

UART 4 für eingebauten ELRS-Empfänger/SBUS-Eingang

UART 5 für GPS oder andere Sensoren, die einen seriellen Anschluss benötigen

 

ESC-Spezifikationen

Produktname: Borg 60R ESC

Eingangsspannung: 3-8S; Unterstützt LIHV-Akku

Max. Dauerstrom: 60A

Max. Spitzenstrom: 65A (10s)

MCU: STM32G071N

Treiber: FD6288

Firmware: BL32 (32bit ESC)

Ziel: IFLIGHT_BLITZ_G3 32.9

Stromsensor: Nicht verfügbar

BEC: Nicht verfügbar

Telemetrie: Unterstützt

Bidirektionales DSHOT: Unterstützt

Abmessungen: 45*52mm±1

Montagelöcher: 20 x 20 mm/Φ4mm

Gewicht: 14,5g±1

Protokoll: Unterstützt DShot150/300/600、MultiShot、OneShot etc.

 

Packliste

1 x Borg 60R ESC

1 x Borg 5S RX Flight Controller

1 x Kabelsatz

5 x Silikon-Durchführungen

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 1521094585

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 17 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Rodney Hahn
San Leandro, US
★★★★★ 5
Works like a champ!
Size: Full-size Truck, SUV
It works great! I had one fairly slow leak and 2 very slow leaks. 3 Tires. 2 were on my 94 Ford Ranger. I put a little more than 1/2 the packet in my fastest leaking tire (on the Ranger) and about 1/4 of the packet in the 2nd tire of the same vehicle. Lastly, I put the final 1/4 in a very slow leaking tire on my 2000 Ford F-150. All tires have stopped leaking!! I am delighted with the effectiveness of this product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
J
Verified Purchase
Jim
Boise, US
★★★★★ 4
Seems to have done a great job.
Size: Full-size Truck, SUV (2-pack)
One of our cars has suffered from rim leaks and was driving me nuts. Constantly being asked by my wife to top off the tires on her car. When I replaced a damaged rim I asked the tire shop to look for the source of the leaks. They said the "alloy" rims had started to corrode and did their best to get them to seal but warned me they would likely leak again. This spring when I removed her snow tires I found 3 of her 4 tires had gone completely flat in storage. The fourth was the new rim which was fine. I considered buying new rims that won't have this problem but wanted to wait until her times need to be replaced. The batteries in the TPMS sensors are getting very low so likely these will need to be replaced as well. I thought to try some sort of sealant. Most of the products I saw were not rated for automotive systems and offered warnings about risk to the TMPS sensors. This seemed to be the only product rated for my application and claimed it would not harm our car's sensors. So I gave it a shot. I ordered the SUV package that came with an injector and two 8-oz bottles. I put 4 oz in each tire per the instructions. Overall the process was easy except the valve core extractor broken on one of the tires. I had to pick up a replacement at a local auto parts store. Also, injecting the sealant creates a small amount of pressure in the tire that, if one doesn't release by drawing out the plunger, will burp a small amount of sealant onto the rims. Fairly easy to clean up with WARM water and easier to avoid after the first experience. Drove the car around at a variety of speeds for 10-15 minutes (had errands to run) and waited to see what happened. Great results. Weeks later and the tires still have the correct pressure. I am not sure how long this will last but hopefully for the remaining life of the tires at least. I took one star off for easy of use / easy to install because the valve core extractor is made of extremely cheap aluminum and I am sure others will have a poor experience with it. Be forewarned and consider buying one before you start jacking up your car and letting the air out of the tires only to find you break the tool on a sticky valve core and are unable to complete the job without a trip to the auto parts store. I'll update this review in about a year to report on the long-term outlook for this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 20, 2023
T
Verified Purchase
Team Ohio
Los Angeles, US
★★★★★ 5
It Works!
Size: Full-size Truck, SUV
When I bought my vehicle it didn't come with a spare. I knew what I was in for. I was on my way to an important meeting and as fate would have, the tire pressure indicator reported a flat. I imagined the worst but experienced the best! The directions said to let all the air out of tire and remove the valve stem core, it seemed like I was making a bad situation worse. Then it said to attach the tube to the stem and squeeze the contents into the tire. I thought "this is never going to work" the fluid seemed too watery to seal anything, but I followed instructions, I reinstalled the valve core and reinflated the tire, and it worked! I expected it to leak immediately, it didn't. It lasted all day and most of the next day until I could get the tire to the shop. They removed a nail and patched the hole, overall I'm very satisfied, I bought a replacement right away, just in case!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Terry Justice
New York, US
★★★★★ 5
Better than the green goo
Size: Full-size Truck, SUV (2-pack)
Recently, while I was at work, I noticed that I had at some point run over a nail with my car. Normally, you'd take your car to the tire shop and let them plug the hole for you. Well, the only problem was that the nail decided that it was going to poke my tire where the sidewall meets the tread, and most shops will refuse to plug a tire when it's punctured there. Makes sense, it's a liability issue for them, so I can't blame them. That still leaves me with the problem of having a tire with a nail in it. So, I could either replace the tire with either a new or used tire, which is expensive or I can try using a sealant to try and get as many miles out of my tire as I can. In the past, I had tried using the green goo sealant on nail holes, and while it works to get you 15 miles down the road, that's about it. Now, while TireJect doesn't recommend using their product on punctures on the shoulder of the tire, I decided that I'd give it a try to see if it would work. And as of writing this review, it's been about 10 days since I put TireJect in my tire, and so far, it hasn't leaked any air, despite it not being meant for the shoulder. When money isn't so tight, I'll probably go ahead and replace the tire, especially since there's only about 4/32 tread depth left, but for the time being, I'll keep running it, and hopefully it keeps holding pressure properly like it has been. Now, as for how easy it is to use, the only tools you will need that aren't provided, is an air compressor to allow you to re-inflate the tire. The kit comes with everything else you will need, including a valve core removal tool and a syringe to add the sealant to your tire. To use this product, you will first need to carefully remove the valve core with the provided tool, careful not to lose the core, since it doesn't come with a replacement core. After that, thread the hose on the syringe on to your valve stem, and then carefully add the required amount of sealant to the syringe. If you accidentally spill some, wipe it off before it dries, so that it doesn't stain anything. From there, just push the goo into the tire with the plunger, adding more to the syringe as necessary. When you're all done, re-install the valve core into the valve stem snuggly, careful not to over-tighten, and air up the tire to the recommended PSI with your compressor. After all that is done, go take a short, slow drive to distribute the sealant, and then recheck your air pressure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2025
T
Verified Purchase
Tony Nowikowski
Boise, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024

recommand products

ice fit 1 78 modernes lederarmband rosa
29.99
Mini ECUs Rover MKC 104 291 Immo Off
139.00
Mitsubishi ECUs Diesel Bosch EDC7C4 0 281 020 063 Immo Off
139.00
Mitsubishi ECUs Diesel Bosch EDC7C4 0 281 020 063 Immo Off
119.00
Mitsubishi ECUs Diesel Denso Other 275700-0148 Immo Off
139.00