Pay in installments of $5911.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 15 - Aug 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
TRENDnet 6-Port Industrial Gigabit PoE+ Din-Rail Switch 12 - 56 V4 x Gigabit Ethernet Ports 2 x Dedicated SFP Slots 60 120W Power Budget 12 Gbps Switching Capacity IP30 Rated Metal Switch Alarm Output Triggered by Power Failure Includes DIN Rail and Wall Mounts With four Gigabit PoE+ ports and dual dedicated SFP slots, the 6 Port Industrial Gigabit PoE+ DIN Rail Switch from TRENDnet is designed to power a variety of PoE compatible devices. This switch features a 60 to 120 watt power budget and comes equipped with a
- 4 x Gigabit Ethernet Ports
- 2 x Dedicated SFP Slots
- 60-120W Power Budget
- 12 Gbps Switching Capacity
- IP30 Rated Metal Switch
- Alarm Output Triggered by Power Failure
- Includes DIN-Rail and Wall Mounts
With four Gigabit PoE+ ports and dual dedicated SFP slots, the 6-Port Industrial Gigabit PoE+ DIN-Rail Switch from TRENDnet is designed to power a variety of PoE compatible devices. This switch features a 60- to 120-watt power budget and comes equipped with a 12 Gbps switching capacity and a 9 KB jumbo frame to handle a large amount of network traffic.
Installation is simple as this switch includes both DIN-rail and wall mounts along with a hardened IP30 housing to help protect against physical damage. The TI-PG62B can even withstand extreme temperatures of -40 to 167 degrees. Once installed, a network administrator can plug a redundant power supply (sold separately) into the switch for backup power while the built-in alarm alerts admins to a power failure.
- Network Ports
- 4 x Gigabit PoE+ ports and 2 x dedicated SFP slots
- DIN-Rail / Wall Mounts
- IP30 rated metal enclosure with included DIN-rail and wall mount hardware
- Switching Capacity
- 12 Gbps switching capacity
- Redundant Power
- Dual redundant power inputs with overload current protection (power supply sold separately)
- Alarm Relay
- Alarm relay triggered by power failure of primary and/or redundant power
- Jumbo Frames
- Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance
- Extreme Temperatures
- Industrial switch is rated for an operating temperature range of -40 to 167°F (-40 - 75°C)
- Shock and Vibration Resistant
- Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)
- Grounding Point
- Grounding point protects equipment from external electrical surges
| Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.3x IEEE 802.3af IEEE 802.3at |
| Device Interface | 4 x Gigabit PoE+ ports 2 x 100/1000 Mbps SFP slots 6-pin removable terminal block LED indicators DIP switch DIN-rail mount Wall mount Grounding point |
| Data Transfer Rate | Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) |
| Performance | Data RAM Buffer: 1024 KB Switching Fabric: 12 Gbps MAC Address Table: 1 K entries Jumbo Frame: 9 KB Forwarding rate: 8.9 Mpps (64-byte packet size) |
| Power | Input: 12/24/48 VDC Output: up to 55 VDC Compatible power supply: TI-S12048 (sold separately) Consumption: Max. 5.76 Watts (no PoE) |
| PoE | PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC PoE budget: 60 W @ 12 VDC |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin Wire range: 0.34 mm^2 to 2.5 mm^2 Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque: 5 lb. - In / 0.5 Nm / 0.56 Nm Wire strip length: 7-8 mm |
| DIP Switch | 1: OFF (port 5 SFP on, default), ON (port 5 SFP off) 2: OFF (SFP 1000 M, default), ON (SFP 100 M) |
| Alarm | Alarm Relay Contact Relay outputs with current carrying capacity of 1 A, 24 VDC Open circuit mode when one power source is connected Short circuit mode when two power sources are connected |
| MTBF | 510,304 hours |
| Housing | IP30 metal case DIN-rail mount Wall mount Grounding point 6 KV ESD protection |
| Temperature & Humidity | Operating Temperature -40 to 167°F / -40 to 75°C Operating Humidity Max. 95% non-condensing |
| Certifications | CE FCC Shock (EN 60068-2-27) Freefall (EN 60068-2-32) Vibration (EN 60068-2-6) |
| Dimensions | 5.6 x 4.1 x 1.8" / 143 x 105 x 45 mm |
| Weight | 1.6 lb / 700 g |
- Removable Terminal Block
- DIN-rail and Wall Mount Kit
- Limited Lifetime Manufacturer Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy