Pay in installments of $14804.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MuxLab Dante/Quad Channel Audio PoE GatewayQuad Single Channel Analog & Dante Audio Dante Standard Signal Protocol 2 x 6 Pin Phoenix Input Connectors 2 x 6 Pin Phoenix Output Connectors 1 x RJ45S for Cat 5e 6 Ethernet PoE IEE802. 3af 20 Hz to 20 kHz Analog Bandwidth The Dante Quad Channel Audio PoE Gateway from MuxLab permits non Dante compatible analog audio equipment to interface with Dante compatible professional audio equipment. It can be used to transmit dual two channel or quad single
- Quad Single-Channel Analog & Dante Audio
- Dante Standard Signal Protocol
- 2 x 6-Pin Phoenix Input Connectors
- 2 x 6-Pin Phoenix Output Connectors
- 1 x RJ45S for Cat 5e/6 Ethernet
- PoE IEE802.3af
- 20 Hz to 20 kHz Analog Bandwidth
The Dante/Quad Channel Audio PoE Gateway from MuxLab permits non-Dante compatible analog audio equipment to interface with Dante compatible professional audio equipment. It can be used to transmit dual two-channel or quad single-channel full-range audio�20 Hz to 20 kHz�over the network to Dante. In addition, dual two-channel or quad single-channel balanced analog audio signals may also be received from Dante compatible equipment in the same manner.
The unit may be connected via Cat 5e/6 cable up to 330' from an Ethernet switch. The Dante/Quad Channel Audio PoE Gateway includes four single-channel balanced analog audio-in and four single-channel balanced analog audio-out ports via phoenix connectors. The quad single-channel balanced analog audio-in ports may be connected to line-level balanced analog audio signals or to line-level balanced microphones.
Furthermore, the quad single-channel balanced analog audio-out ports may be connected to balanced analog audio amplifiers supporting line-level inputs, such as a zone amplifier (100W), or to two pairs of powered speakers for direct sound output. Finally, the Dante/Quad Channel Audio PoE Gateway can be powered by a PoE Ethernet switch. Cables and a power supply are not included.
- Interface analog audio equipment to Dante audio equipment
- Supports dual two-channel or quad single-channel full-range balanced analog audio from 20 Hz to 20 kHz
- Transmission up to 330' over Cat 5e/6
- Supports quad single-channel balanced analog audio-in and quad single-channel balanced analog audio-out from Dante audio equipment
- Balanced audio ports may be interfaced to unbalanced audio ports when only 2 of 3 pins are used per channel
- IP managed for remote control
- Controllable via the Audinate Dante controller software
- PoE powered
| Environment | Quad single-channel balanced analog audio and Dante audio |
| Devices | Analog audio equipment and Dante professional audio equipment |
| Connectors | 2 x 6-pin phoenix connector, for quad single-channel balanced analog audio-in 2 x 6-pin phoenix connector, for quad single-channel balanced analog audio-out 1 x RJ45S for Cat 5e/6 unshielded or shielded twisted pair, for Ethernet connection 1 x 2.1 mm jack, for power |
| Maximum Distance | Cat 5e/6: 330' / 100 m from Ethernet Switch Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used. |
| Signal Format | Dante |
| Bandwidth | Analog: 20 Hz to 20 kHz Network: TBD |
| RJ45 Pin Configuration | Reverse Polarity Sensitive: Use EIA/TIA 568A or 586B straight-through wiring RJ45 Link: Pin 1 (R) pin 2 (T) Pin 3 (R) pin 6 (T) Pin 4 (R) pin 5 (T) Pin 7 (R) pin 8 (T) |
| Cables Supported | 1 x Cat 5e/6 or better twisted pair cables required 8 x quad single-channel balanced audio cables with 3-pin phoenix connectors (for audio-in and audio-out) |
| Power Source | This device supports PoE (PD); an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet switch. If required, an optional power supply may be purchased separately. |
| PoE | IEEE 802.3af |
| Power Consumption | 4.5 W |
| Temperature | Operating: 32 to 104°F / 0 to 40°C Storage: -4 to 185°F / -20 to 85°C |
| Humidity (Non-Condensing) | Up to 95% |
| Compliance | Regulatory: FCC, CE, RoHS Flammability: 94V0 |
| Dimensions (W x L x H) | 4.4 x 4.6 x 1.0" / 11.2 x 11.7 x 2.5 cm |
| Weight | 1.5 lb / 0.7 kg |
| Packaging Info | |
|---|---|
| Package Weight | 1.0 lb |
| Box Dimensions (LxWxH) | 8.0 x 6.0 x 2.3" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy