SKU: 26660351431

Standard PLA+, Aquamarine, 1.75mm

$23.36 $25.95
Save 10%
No.2 Bestseller on nasasuma.com >

Pay in installments of $6.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 15 - Aug 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Standard PLA+, Aquamarine, 1.75mmA peaceful shade of blue that approaches the transition from light blue to light green, Aquamarine Standard PLA+ is an excellent addition to your 3D printing color portfolio. Standard PLA+ is a basic, entry level PLA filament. It's available in a broad color selection and uses only virgin NatureWorks Ingeo 4043d PLA resin. No fillers or stretchers means a more predictable 3D printing experience. Because we don't use fillers, the ideal print temp might

A peaceful shade of blue that approaches the transition from light blue to light green, Aquamarine Standard PLA+ is an excellent addition to your 3D printing color portfolio.

Standard PLA+ is a basic, entry-level PLA filament. It's available in a broad color selection and uses only virgin NatureWorks Ingeo 4043d PLA resin. No fillers or stretchers means a more predictable 3D printing experience. Because we don't use fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Our Standard PLA+, or Polylactic Acid, is among the most popular 3D printing materials worldwide because it is easy to print and strong. Standard PLA+ is a hard plastic that produces a barely noticeable, but quite pleasant, sugary smell when extruding.

The broad color selection and ease of printing make it an ideal choice for printing in a multi-color 3D printing system like the Bambu Lab AMS.

Print Profiles

Print profiles for Standard PLA+ on the Bambu Lab printers are available here.

Bambu AMS Compatibility

Since October 2023, the 3D-Fuel Standard PLA+ has been manufactured using an AMS-compliant spool (more info on our spool sizes and weights). Since it takes time for some colors to move through our warehouse inventory, you may receive an older spool type. This is still compatible with the AMS, but you must leave the lid open a few mm.

Available In 40 Colors

Color Name Display Hex Code Closest Pantone®
Natural Clear Clear 
Brightest White
#EBECEA P 179-1 U
Snow White
#F2F2ED P 1-1 C
Bone White
#F3E2C7 P 8-1 U
Almond
#DACCB2 13-1006 TPG
Desert Tan
#C1AC98 15-1309 TPG
Flat Dark Earth
#977B6C 4257 CP
Chocolate Brown
#58413B P 67-16 C
Warm Bisque
#DEB29C 7415 C
Bubblegum Pink
#EAAAB6 4064 UP
Island Fuchsia
#B8588F 17-2624 TPG
Grape Purple
#5E528F 7679 CP
Cobalt Blue
#0C3681 2736 CP
Ocean Blue
#0069A4 2935 CP
Caribbean Blue
#008FA7 7704 CP
Fjord Blue
#009ECF P 112-7 C
Electric Blue
#56C2D3 P 118-5 C
Aquamarine
#99D9C5 13-5412 TPG
Pistachio Green
#B4D59C 13-0221 TPG
Olive Green
#545746 176-15 C
Forest Green
#306350 626 CP
Grass Green
#4D9D5A P 139-8 U
LulzBot Green
#C8CB18 14-0443 TPG
Daffodil Yellow
#FFC02C 109 UP
Harvest Gold
#F9B247 7406 UP
Tangerine Orange
#EF744C 16-1349 TPG
Autumn Orange
#D15531 P 40-16 C
Fire Engine Red
#C73229 P 52-16 C
Iron Red
#8A292A P 54-8 C
Metallic Copper
#894D3F 7601 CP
Metallic Gold
#C58F4C 16-0950 TPG
Metallic Silver
#7D8081 Cool Gray 11 U
Industrial Gray
#858B8D Cool Gray 10 U
Castle Gray
#73787B 7540 UP
Charcoal Gray
#4D545A 296 UP
Midnight Black
#353535 19-4006 TPG
Fluorescent Green
#4CC573 16-6340 TPG
Fluorescent Orange
#EA7A68 P 45-5 U
Fluorescent Yellow
#CCDE5D 2288 C
Glow-in-the-Dark
#

Additional Filament Info

Print Settings

  • Hotend Temp: 190-230C
  • Bed Temp: 0-60C
  • Bed Surface: Bambu High Temp Plate, Bambu Cool Plate, Bambu Textured PEI, heated bare glass, blue painters tape, BuildTak, WhamBam
  • Recommended Print Speed: 60 - 250 mm/s

Download SDS
Download TDS

Quality:
All 3D-Fuel 3D printer filament is manufactured in our own production facilities in the United States. We have complete control over the manufacturing process and can ensure consistent quality for every spool. Learn more about 3D-Fuel filament quality.

Diameter Tolerance:
Variable 3D filament diameters can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.

Packing Information:
A full 1kg (2.2 lbs) of Standard PLA+ plastic filament arrives on a durable plastic reel compatible with the Bambu Lab AMS. The reel is vacuum-sealed with a desiccant packet to keep out moisture.

Test Printing: 
The 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Prusa, Raise3D, MakerBot, LulzBot, FlashForge, and more. We use what we manufacture in our 3D printing operations to ensure that our filament provides the absolute best quality possible.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 26660351431

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
C
Fort Morgan, US
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex. My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan. The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time. Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape. The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one. It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018
C
Verified Purchase
C. Day
Pawtucket, US
★★★★★ 4
Worked well, fast, then overheated. Contacted Vomelon and they were quick to help me replace unit.
Color: Silver
Update ***Vomelon customer service is great! I contacted them about my issue, they responded quickly and worked to resolve it. They're giving me a new one! Hope this one works out. I'm adding back a star for their service. Update 4/18/20 While making whipped Dalgona coffee today the unit slowed down the completely shut off. I pressed the power button again to restart and same thing, it starts at high speed then slows down and shuts off. I will be contacting seller. I’m taking away a star, can’t believe this is happening. First day using this frother with the batteries provided and the body became very hot. Used it for about 3 minutes and the heat became uncomfortable in my hands. Took out the AAA alkaline batteries “Nai Li Wang” brand made in China and replaced them with some Kirkland AAA that I had on hand. Problem solved! No overheating with the new batteries. Throwing away the China made batteries. Would’ve been 5 stars if it weren’t for the overheating. Other than that mishap, the frother was easy to use and pretty powerful. Whipped up my coffee with maple syrup (making Dalgona coffee) really quick. I like that it has a cover for storage. I don’t have much space so having a compact size with a cover is convenient, I can put it in a drawer or storage box without damage to the whisk. Update: Day 2 of use Body of unit became warm but not hot as with original batteries provided. I used new batteries. Had the unit on for 4-5 minutes to whip my dalgona coffee. Not sure if the unit is supposed to get warm? Is it normal? I will contact seller. Besides that, my coffee got whipped pretty quick. I want to upload a photo but seems that Amazon has taken away that function for me? I could upload photos for my previous reviews on other products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2020
G
Verified Purchase
Guy E. Wolek
Battle Creek, US
★★★★★ 5
Great Little Frother.
Color: Silver, Color: Silver
I really like this this little frother. What I noticed first is that it comes with a cover for the frothing arm. That’s very practical if you travel with it. I have traveled with a frother before and I put it in a toothpaste box, not much protection there. I use this 2 to 4 times a day. I can come pretty close to creating a Starbucks flat white at home. That saves $$$. The next thing I really like is that I can remove the arm for cleaning. If the arm does not come off clean up is a bit tricky. How does it work? Great! It has one speed, Fast. The power button is on the base of the handle so I just had to adjust the way I hold the frother when I turn it on. One thing, make sure the froth head is all the way into the liquid when you start it, lol. This little machine whips up a thick froth fast. It comes with 2 frothing heads, a three spring version as well as a standard one spring. There is a lot of plastic, but it doesn’t look or feel cheap. Actually I think it helps keep the weight down. I travel some and I appreciate when things are light. Over all, this is really nice it’s light portable and works great. I highly recommend this product. I was given this product for review and I am so glad they choose to contact me. I have been frothing milk for my coffee for the last few years. This has now became my go to frother.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2019
J
Verified Purchase
JSS
Chelsea, US
★★★★★ 5
Great Frother
Color: Silver
The best frother I’ve owned! Love that the whisk is removable for washing, the end is flat so it stands up on its own and it’s pretty powerful.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
T
Verified Purchase
Toga
Waukegan, US
★★★★★ 1
Almost right but connector sucks
Color: Silver
I much prefer a frother with swappable batteries and always use rechargeable AAA's and never disposable one's. The power button is in a comfortable spot as opposed to everyone else's odd and very uncomfortable side placement. Placing the power button on the side make you have to twist your entire arm to have your thumb facing down to be able to press anything whereas this one is right on top and can hold it like a simple joystick with no twisting of my arm. However, these plastic attachment points crack waaay too easily. I've already bought 3 of these and this is the part that breaks on all of them. I have designed and printed new attachments but the installation of them can damage the motor if I'm not careful. The motor also looses torque after only a few months. The windings need to be improved. Even though I really hate the plastic attachment, the button on top and the ability for it to stand up on its own without some stupid fiddly stand are the ONLY reasons I come back to this design. The moment someone makes a fully metal attachment (like I've seen) a power button on top and self standing, I'll throw this one away. Updated April 2025: I am about to buy my 4th one since 2019. This is NOT an endorsement for it, I just haven't found anything design wise that's better. The motor in these are short lived and they give out with no warning. Ergonomically this design make more sense than a side mounted button or switch, but I'm still dropping a star for the fact I've had to buy 4 of these darn things in such a short time Update: Oct 2025 I just bought this replacement in April and this things motor is already dead. I'm done with this item/seller. Just an overly cheap product. Product no longer worthy of even 2 stars
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2024

recommand products

Irina Puff Sleeve Black Dress
115.00
Elastic Viscose Belt Blue - Enrico
70.00
Isla Print Midi Dress
155.00
Zia Black Smock Tie Midi Dress
127.50
Braided Suede Belt Grey - Francesco
90.00