Elektric Offroad Designs 2024+ Can Am Maverick R Rear Link Nut Plate Kit

Elektric Offroad Designs 2024+ Can Am Maverick R Rear Link Nut Plate KitFrom the factory, CanAm uses heavy duty Loctite on the radius rod nuts, which often breaks the spot welds inside the frame when you try to remove them causing the nuts to spin freely and making simple installs like a radius rod plate or radius rods a major headache. This kit eliminates that problem entirely. It securely locks each nut in place, so you can remove or install your radius rods or plates without spinning nuts, broken welds, or wasted

From the factory, Can‑Am uses heavy-duty Loctite on the radius rod nuts, which often breaks the spot welds inside the frame when you try to remove them — causing the nuts to spin freely and making simple installs like a radius rod plate or radius rods a major headache. 

This kit eliminates that problem entirely.
It securely locks each nut in place, so you can remove or install your radius rods or plates without spinning nuts, broken welds, or wasted hours.

💪 Key Features & Benefits

• Locks Down Your Hardware
  Prevents nuts from backing off or spinning during install or service.
• Drastically Cuts Install Time
  No more fighting with over-Loctited factory nuts or spinning welds. Get back on the trail faster.

• 100% Bolt-On Fit besides drilling out factory rivets

No cutting or welding — bolts directly to stock locations.

• Service-Friendly Design
  Allows for future removal without damaging your frame or nuts.

For product install instructions Click Here

📦 Kit Includes

• (2) Upper Nut Retainer Plates
• (1) Middle Nut Retainer Plate
• (1) Lower Nut Retainer Plate
• (6) M5 × 16mm Class 304 stainless/ Black Zinc
• (6) M14 Nylock Nuts 304 stainless/ Black Zinc

ecs 4-15-26