Honda Talon Plug & Play™ 6 Switch Power Control System - Switches Not Included By XTC

Honda Talon Plug & Play™ 6 Switch Power Control System - Switches Not Included By XTCFree Shipping with in The Lower 48 States SKU: PCS 64 HT NS Plug and Play Easy InstallFits 2019 2020 Honda Talon1 x 30 AMP, 3 x 20 AMP High Power Relayedand 2 x 10 AMP Direct Switch CircuitsFuse Block with Blown Fuse LED IndicatorEach Switch on Individual Fuse8GA Power Cable 50 AMP Main Circuit Breaker at BatteryBarrier Strip for Clean IntegrationBottom Row Lighting when upgraded switches used6 Switch System, Switches Sold SeperatelyMade in the USA! 6

Free Shipping with in The Lower 48 States

SKU: PCS-64-HT-NS

Plug and Play Easy Install
Fits 2019-2020 Honda Talon
1 x 30 AMP, 3 x 20 AMP High Power Relayed
and 2 x 10 AMP Direct Switch Circuits
Fuse Block with Blown Fuse LED Indicator
Each Switch on Individual Fuse
8GA Power Cable 50 AMP Main Circuit Breaker at Battery
Barrier Strip for Clean Integration
Bottom Row Lighting when upgraded switches used
6 Switch System, Switches Sold Seperately
Made in the USA!

6 Switch Power Control System for Honda Talon

XTC Power Products Leads the way in UTV Wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Honda Talon. Unlike other switch systems available, the Power Control System’s designed with the installer in mind. Every PCS has a vehicle specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.

Power Delivered

The PCS includes 1 x 30 amp and 3 x 20 amp high current circuits on relays with Diode protection. The design reduces voltage spikes from field collapse, protecting LED lights and other sensitive accessories. There are also 2 x 10 amp direct wire circuits provided for low power accessories like rock lights or whip lights. Additionally included is a fuse block that protects the circuits and comes with an eight gauge power cable and fuses. Most UTV charging systems produce anywhere from 40-70 amps. Because of this, a 50 amp circuit breaker at the battery safely supplies power to the PCS. Installing a 100+ amp high power switch system is not practical in a UTV.

The Power Control Systems Barrier Strip

Pro wiring installers have been using barrier strips in off-road vehicle builds for years. Some good reasons would be aesthetics, along with ease of use when adding new connections and troubleshooting down the road. Each screw point on the barrier strip has a different colored wire that corresponds with the fuse box and switches harness wires. Therefore the 1st rocker switch would be the large 30 amp grey wire, and then so on and so forth.

Honda Talon Switch System Power Harness Configurations

Designed for the Honda Talon, the PCS-64-HT-NS switch harness has 6 Rocker Switch Positions in a row that mount in the center dash. Also, the rocker switches can be installed together in any custom way deemed fit by the installer as well. Moreover, a Molex connector links the switch harness to the main Power Control System.

Modular Power Connection

The PCS-64-HT-NS has a modular power connector at the fuse box that plugs inline with the vehicles ignition power. Consequently, the lower LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The upper light only comes on when the rocker switch’s pressed. It should be noted that the wiring system will work with or without the vehicle’s ignition power on. XTC Power Products, made in America and Wired For Fun®!

*LED lit custom rocker switches sold separately on our Rocker Switch page.

Installation information can be found at xtcinstall.com

CB 7/20/2021