Bluetooth Receiver - Audio Engine B1

Bluetooth Receiver - Audio Engine B1Bluetooth Receiver: Audio Engine B1 Add high fidelity Bluetooth to any system. B1 is a high fidelity audio component that easily integrates into your music system and plays music directly from your library or streams from any app. The B1 streams high quality audio from your Bluetooth enabled smartphone, computer, or tablet to any music system or powered speakers. With support for the aptX HD audio codec built in, you can enjoy truly high resolution

Bluetooth Receiver: Audio Engine B1

Add high fidelity Bluetooth to any system.
B1 is a high-fidelity audio component that easily integrates into your music system and plays music directly from your library or streams from any app. The B1 streams high-quality audio from your Bluetooth®-enabled smartphone, computer, or tablet to any music system or powered speakers. With support for the aptX HD audio codec built in, you can enjoy truly high resolution audio with all the convenience of a Bluetooth connection.

Type
Bluetooth receiver type

Bluetooth 4.0 audio
Supported Bluetooth codecs
aptX HD, aptX, AAC, SBC

Supported Bluetooth profiles
A2DP, AVRCP

Inputs
Bluetooth

Outputs
Stereo analog RCA
Digital optical (SPDIF)

Required power
5V, 200mA

Operation range
up to 100ft (30m) typical

Full-scale output
2.0V RMS

Output impedance
57 Ohms

D/A converter
AKM AK4396

Power filtering
3-stage redundant regulation

SNR
SNR (DC to 20 kHz)
>100dB

THD+N
(1 kHz FS 96 kS/s) <0.02%

Frequency response
10Hz – 20kHz (+/-0.5dB)

Crosstalk
>-86dB

Input bit depth
24-bit (upsampled)

Input data rate
Determined by Bluetooth

Latency
~30 milliseconds (ms)

Product dimensions
3.5 x 4.0 x 1”

Shipping weight
1.0lbs (0.5kg)

Shipping box dimensions
11 x 7 x 3″

Environmental Requirements
Operating temperature: 32° to 105°F (0°C to 40°C)
Storage temperature: -4° to 115°F (-20°C to 46°C)
Relative humidity: 5% to 95% non-condensing

Included accessories
RCA audio cable (3ft/1m)
Power adapter with detachable cable
Microfiber bag
Setup guide

Technical Features
Supports all Bluetooth-enabled devices
High-fidelity Bluetooth® with aptX HD transmission and extended range
Stream high-resolution 24-bit digital audio from the Audioengine B1 to any music system.
Includes built-in AKM4396 DAC for superior 24-bit upsampled playback
Aluminum case with audiophile-grade connectors
Analog and optical outputs
2.0Vrms maximum output level

Experience stunning audio quality with aptX HD coding, built-in 24-bit upsampling DAC, and extended wireless range.

DAC Characteristics
The B1 Bluetooth Receiver utilizes the AKM AK4396A DAC, widely known for its low noise and high fidelity. B1 is essentially an upsampling 24-bit Bluetooth DAC and will pad all bit depths internally to 24-bits, thus achieving a higher signal-to-noise ratio. Due to the AK4396A’s high signal-to-noise specs, the fact that digital signal is converted (upsampled) to 24-bits and the added benefit of triple redundancy power source conversion and filtering, the B1 presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

Extended Range
Most Bluetooth implementations have very limited range, usually within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that will reach more than one room with no degradation in audio quality.

High quality Bluetooth audio
The B1 features aptX HD coding which is an advanced Bluetooth audio codec that provides much higher-quality sound than previous versions. The B1 is backwards-compatible with all previous Bluetooth implementations so you can wirelessly stream music from any device and still enjoy outstanding sound.

Optical Output
B1 also functions as a wireless audio bridge from your device to your favorite DAC or preamp. Use the internal DAC with RCA analog outputs or connect the optical output into another DAC.