SKU: 13464096312

NutraBio | KSM-66 | 60 Servings

Sale price$18.89 Regular price$20.99
Save 10%

Pay in installments of $5.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 11 - Aug 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

NutraBio | KSM-66 | 60 Servings600mg KSM 66your daily fix for stress and recovery NutraBio KSM 66 Ashwagandha is a no frills adaptogen setup focused on one smart choice: a single branded extract at the dose that shows up most in human studies, skipping anything that doesn't add value. This isn't some cheap ashwagandha with vague sourcing, big numbers that mean nothing, or a mystery stress mix. It's 600mg of KSM 66 Ashwagandha Root Extract per capsulea full spectrum extract from

600mg KSM-66®—your daily fix for stress and recovery

NutraBio KSM-66 Ashwagandha is a no-frills adaptogen setup focused on one smart choice: a single branded extract at the dose that shows up most in human studies, skipping anything that doesn't add value. This isn't some cheap ashwagandha with vague sourcing, big numbers that mean nothing, or a mystery stress mix. It's 600mg of KSM-66 Ashwagandha Root Extract per capsule—a full-spectrum extract from just the root, standardized to 5% withanolides—in an easy capsule for everyday use.

KSM-66 stands out because not every ashwagandha is the same. Extracts differ by what part of the plant they use, how they're made, their withanolide mix, and the real studies backing them. KSM-66 is the go-to root-only extract and has been in tons of trials on stress handling, sleep, workout performance, sexual health, and guy hormone levels. Sticking to roots matters if you want the classic profile over leaf-based ones that might look better on paper but lack the same study support.

At 600mg, it's right in the sweet spot from studies. That matches the daily amount in key KSM-66 research, often split as 300mg twice a day. Studies at this level show real drops in felt stress and cortisol in the blood, better anxiety and well-being scores, and for folks who lift, gains in strength, recovery, and positive testosterone shifts versus placebo. Ashwagandha acts as an adaptogen: it helps your body manage stress without being a buzz or a downer. In real life, that means staying cool under pressure, ditching the 'wired but tired' feel, more recovery room, and a nervou

NutraBio KSM-66 by NutraBio contains 600mg Ashwagandha Root Extract (KSM-66®), a clinical dose for health and performance.

Key Highlights

  • 600mg KSM-66® per capsule — this hits the dose range from multiple studies on stress, cortisol, and workout wins. It's not a weak add-in; it's a full serving that stands alone and gets the job done.
  • Root-only ashwagandha extract — KSM-66 comes from the root, not a mix or leaf-heavy version. That's key because this branded stuff's studies and profile are all about that root base.
  • Standardized to 5% withanolides — this keeps the extract consistent every time, not varying like raw herbs. At 600mg, you get a good hit of the active stuff that drives ashwagandha's benefits.
  • Solid stress support — studies on 600mg KSM-66 daily show less felt stress and lower cortisol. For you, that means smoother days, better chill, and a baseline that's easier to recover from.
  • Workout perks too — this isn't just for chill vibes. In trained folks, KSM-66 has data on strength, recovery, body comp, and hormone shifts, making it a smart add for gym life.
  • No stims for clean recovery — zero caffeine or hard pushes here. Perfect for any time of day, especially if you're already loading up on stims elsewhere.
  • Straight-up single ingredient — one active, full dose, all out in the open. In a world of shady adaptogen mixes, this lets you check it against the studies and know what you're getting.
  • Stacks easy — super clean formula means it fits right in with creatine, protein, electrolytes, pre-workouts, or sleep aids. Fills your stress gap without doubling up on stuff.

NutraBio KSM-66 by NutraBio contains 600mg Ashwagandha Root Extract (KSM-66®), a clinical dose for health and performance.

Who Is This For?

  • Lifters grinding through tough weeks who see stress hurting their game. The 600mg KSM-66 is made for you: training hard but needing better stress control, recovery, and consistency without more stims.
  • Guys chasing strength, better body, and hormone support who want a backed adaptogen over mystery test boosters. KSM-66 has studies on stress, recovery, and sometimes testosterone and strength, so it's a smart daily add.
  • Busy pros who wake up drained, stay on all day, and can't fully unwind at night. Ashwagandha fits because it tackles stress response, not just covering tiredness with caffeine.
  • Night gym folks who skip stim pre-workouts but want long-term recovery and toughness. This is stim-free and boosts the big picture without jacking heart rate or messing sleep.
  • Athletes in heavy training who need to handle life stress while keeping performance up. Adaptogens like this shine when workout and daily stress outpace recovery.
  • Newbies starting supps who want one clear ingredient with real dosing. Solo KSM-66 is easy to try, tolerate, and add to stacks over big mixes.

How to Use

Take 1 capsule daily with water. With 600mg KSM-66 Ashwagandha inside, it's about being consistent, not perfect timing—so pick a spot you can hit every day. For daytime stress help, go with breakfast or lunch; if it chills you out, try evenings. With food is smart if your stomach's picky, but many handle it fine empty. No need for half doses—one capsule is the full deal, but newbies can test on a chill day. Stacks great with creatine, protein, magnesium, sleep stuff, and stim or no-stim pre-workouts—no caffeine here. No big cycling needed; run it daily for 4 to 8 weeks to see the real deal. Keep it cool and dry, bottle shut tight for fresh capsules.

What to Expect

Minutes 0-30: swallow the capsule with water—no big feel like pre-workout. Hours 1-8: some notice a bit more calm or less edge, but day one is often neutral for most. Days 3-7: sticking with it starts paying off, with steadier vibes or less snap from stress. Weeks 2-4: this is when KSM-66 really clicks, with tougher stress handling, better sleep for some, and easier training weeks. After week 4, it's about keeping that solid base, not a one-time high. It's a build-up adaptogen, not an instant boost.

Key Ingredients

  • KSM-66 Ashwagandha Root Extract — 600mg — Clinically dosed adaptogen for stress, recovery, and resilience

NutraBio KSM-66 by NutraBio contains 600mg Ashwagandha Root Extract (KSM-66®), a clinical dose for health and performance.

Frequently Asked Questions

How much KSM-66® Ashwagandha is in each serving?

Each serving provides 600mg of KSM-66® Ashwagandha Root Extract. That puts it directly in the clinically relevant intake range used in several human studies on stress, cortisol, and performance-related outcomes.

Is 600mg of KSM-66® a clinical dose?

Yes. 600mg daily is one of the most established intake levels for KSM-66 in the research, often used as 300mg twice daily. NutraBio delivers that full daily amount in a straightforward 1-capsule serving.

Will I feel this product right away?

Do not expect a stimulant-like rush. Some users notice a calmer baseline or less mental edge early on, but the more meaningful benefits of KSM-66 usually build over 2 to 4 weeks of consistent daily use.

Is this product stimulant-free?

Yes. This formula contains no caffeine or other stimulant ingredients. It is designed for stress adaptation and recovery support, not acute energy.

What makes KSM-66® different from generic ashwagandha?

KSM-66 is a branded, root-only ashwagandha extract with a recognizable clinical research history. That matters because many generic ashwagandha products use less-defined raw materials or extract profiles that are harder to compare directly to published studies.

Can I stack this with pre-workout or coffee?

Yes. Because NutraBio KSM-66 Ashwagandha contains no stimulants, it pairs well with coffee, stim pre-workouts, creatine, protein, and sleep-support products. It fills a different role by helping manage the stress side of performance and recovery.

When should I take NutraBio KSM-66 Ashwagandha?

Take 1 capsule daily at a time you can stay consistent with. Morning or midday works well for stress support throughout the day, while evening can make sense for users who find ashwagandha subjectively calming.

Do I need to cycle this product?

Most users do not need an aggressive cycle strategy with KSM-66. The more important variable is consistency—run it daily for at least 4 to 8 weeks before deciding how well it fits your routine.

Is this a good ashwagandha for athletes?

Yes. KSM-66 is one of the few ashwagandha ingredients with meaningful crossover research into strength, recovery, and exercise performance, which makes it more relevant to athletes than many generic wellness formulas.

Are there any other active ingredients in this formula?

No. This is a single-ingredient formula built around 600mg of KSM-66 Ashwagandha Root Extract. That simplicity is a strength because it gives you full label transparency and easy stacking flexibility.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13464096312

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Robert O. Forsyth Jr.
Louisville, US
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk! Built cheaply. Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper. If you have a piece of paper that has a fold in it, forget about it. That will never feed through. I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides. It took 23 minutes to get done. Should not have taken 2. The last time I used it same issues but less sheets. The paper is SO TIGHT in the feed section it is hitting BOTH walls. You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly. While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!) Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds. Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going). Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit! So much for a 5 year Warranty. Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022. Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm . As they pass you along the ranks you have to repeat EVERYTHING all over again. As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out. Just PLOP! Other issues while I am at it, the Picture quality is "OK" nothing special. I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff. The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's). Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it. I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC. I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.) The panel function is anything but user friendly. Firmware Updates, if not done, will prevent usage until done. You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined. Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded. The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges. The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP? But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low. They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon. You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
M
Verified Purchase
Michael A. Adkins
Port Orchard, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Fort Morgan, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Los Angeles, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Battle Creek, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026

recommand products