Pay in installments of $363.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli SPEC 3.5" Leveling Backcountry 2.0 Suspension System 20-22 Ford 6.7L PowerstrokeWhen most people think about a "leveling kit," they think about a spacer that goes between the front coils and coil buckets to effectively raise the front of the truck several inches. While this type of product does "level" the truck for fitment of larger tires, it does absolutely nothing to improve upon the handling and overall suspension performance of the vehicle. In fact, this type of system will typically degrade these factors, as the existing
When most people think about a "leveling kit," they think about a spacer that goes between the front coils and coil buckets to effectively raise the front of the truck several inches. While this type of product does "level" the truck for fitment of larger tires, it does absolutely nothing to improve upon the handling and overall suspension performance of the vehicle. In fact, this type of system will typically degrade these factors, as the existing shocks are over extended, the caster is not accounted for, and the axle is offset because the factory track bar is still in place. If you want to level your truck the right way, then this is the system for you!
The Backcountry 2.0 Suspension System from Carli is about leveling your truck the RIGHT way. It's designed for people seeking light to medium off-roading while still maintaining good on-road driving. Utilizing Carli SPEC 2.0″ diameter shocks tuned for slow to mid speed off road use as well as all-around comfort and ride quality while driving in town, on the highway, towing, or hauling. Carli SPEC 2.0 boasts an aluminum body, hardened steel shaft, and full rebuild-ability. The shocks contain premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. Your truck will sit 3.5” higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. To accommodate the additional travel, the kit contains improved brake lines, an adjustable track bar, and caster adjusters to improve on the stock handling.
FRONT SWAY BAR OPTIONSThe front sway bar geometry will need to be addressed with your choice of the following options
(after selecting an option, you can view an image of it by clicking up through the images above)
-
Sway Bar Drop Brackets
- Economical choice
- Maintains the factory Sway Bar End Links
-
Extended Sway Bar Links
- A much more robust option
- Only option compatible with a snow plow bracket
-
Torsion Sway Bar w/ Links
- Optimized for use with Backcountry System
- Huge ride quality upgrade
- Not for snow-plows, in-bed campers, or constant heavy loads
This system is designed to be paired with a rear leaf spring upgrade to achieve the proper stance.
(after selecting an option, you can view an image of it by clicking up through the images above)
-
Add-a-Pack
- Replaces the stiff overload leaf with a pack of 6 progressive leafs for a smoother ride
- Maintains original load carrying capacity
- Rear will be 0.5" to 1.0" higher than front when paired with the 3.5″ front suspension system
-
Full Progressive Leaf Spring Kit
- Replaces stock 5 leaf design with a 12 leaf progressive design for a smoother ride
- Only a slight reduction from a standard 3/4-ton load capacity
- Rear will be 0.5" higher than front when paired with the 3.5″ front suspension system
- HD Full Progressive Leaf Spring Kit
- For the customer that constantly has a +1,000lb load in their bed
- Rear will be 1.0" higher than front when paired with the 3.5″ front suspension system
- With an empty bed, these will lift the rear more than stated and ride very rigid
- Upgraded Leaf Spring Shackles
- Larger rubber bushings for a far better ride
- Free-floating bushing instead of rigid
- Greasable and Rebuildable
IMPORTANT NOTES:
- Wheels: Carli recommends a 17"-18" wheel, no more than 9" wide with 5" - 5.5" of backspacing
- Tires: 35", E-rated tire is recommended. Tire pressure 45psi front, 40psi rear
- Configuration: Carli leveling systems are designed and tested on vehicles with 17"-18" wheels with 35", E-rated tires. Running stock wheels and tires or a larger wheel diameter will result in a stiffer ride.
- Add-a-Pack: Super-Duties equipped with a factory 3-5/8" block will require the 2" factory block (Part numbers 7C3Z-5598-L, and 7C3Z-5598-K) to achieve a level stance. Fits 3.5″ axle tube.
- Full Rear Leaf Spring Kits: Full leaf spring kits require NO BLOCKS to achieve a proper stance.
- Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any leaf spring provisions.
- Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any sway bar drop or Torsion Sway Bar provisions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy