Pay in installments of $95.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 31 - Aug 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
K&N Performance Air Intake System (63-3096)The K&N AirCharger 63 3096 air intake system replaces the restrictive factory air filter and air intake housing in some Cadillac CTS V models. This system allows the engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The K&N air filter is made from multi layers of oiled cotton gauze which improves air flow and can be used up to 100,000 miles
The K&N AirCharger 63-3096 air intake system replaces the restrictive factory air filter and air intake housing in some Cadillac CTS-V models. This system allows the engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The K&N air filter is made from multi-layers of oiled cotton gauze which improves air flow and can be used up to 100,000 miles before cleaning is necessary (depending on driving conditions). The intake tube is made from carbon fiber to improve the look in the engine bay and to be lighter in weight than the factory system. It is also designed to accomodate the factory MAF sensor and crank case vent fitting. A heat shield is designed to keep out hot engine bay air, and also uses the existing factory mounts for installation. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Carbon fiber intake tube
- Replaces entire factory air intake system
- K&N No-Hassle Lifetime Limited Warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 15 reviews
Sort
Product Reviews
★★★★★ 5
Easy to install
Color: 4*2.5in Cube LED Pod
Definitely more than I expected. .. dang good product and easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab.
The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite.
To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place.
The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me.
No backlight on the switch, which is a necessity, and I dont understand why that feature is not present.
Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well.
5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 5
Bright lights
Color: 4*2.5in Cube LED Pod
Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
★★★★★ 5
Great product
Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
Great lighting and beautiful design!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
recommand products
Duracell MN1500B6Z DUR COPPERTOP AA RETAIL/CARDED 6CT
14.12
Cusco Strut Bar OS Rear GH8-GRB GVB BR9 BM9 (Need PANEL CUT) Impreza WRX/STi - 692 541 A
198.00
Duracell MN2400B4Z DUR COPPERTOP AAA RETAIL/CARDED 4CT
10.47
Cusco Add on Bar Kit For Roll Cage /Aluminum 930-1020mm 36.6-40.2 (S/O / No Cancel) - 00D 270 AT10A
135.00
Cusco Add on Bar Kit For Roll Cage /Steel 1130-1220mm 44.5-48.0 (S/O / No Cancel) - 00D 270 AT12
128.25