Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
For Your Every Summer RSVP, with Code: SUMMER15
Description
Sprint Booster V3 10-22 Ford F-SeriesWith the advent of drive by wire systems over the years, the delay in throttle response has caused a degradation of reaction time due to multiple signals being forced through numerous computers before fueling is actually applied. The Sprint Booster is a simple to install device with multiple options to substantially reduce and even eliminate this delay. HOW IT WORKS: Sprint Booster modifies the signal at the accelerator pedal, making your truck's
With the advent of drive by wire systems over the years, the delay in throttle response has caused a degradation of reaction time due to multiple signals being forced through numerous computers before fueling is actually applied. The Sprint Booster is a simple to install device with multiple options to substantially reduce and even eliminate this delay.HOW IT WORKS:
Sprint Booster modifies the signal at the accelerator pedal, making your truck's throttle respond faster to your foot. Basically, it ramps up the signal once you apply pressure on the pedal faster than what the stock signal would normally do, telling your ECM to crank up the fueling faster, effectively reducing your idle to full throttle time by 25%.
By making the throttle respond faster, you will feel as though your truck has more muscle than it really does! This is especially evident in the low to mid RPM range where most vehicles spend their time on the street.
INSTALLATION IS A SNAP:
Sprint Boosters require no mechanical tools or know-how. Simply locate and remove the harness connector on the accelerator pedal, plug the Sprint Booster between the pedal and the harness connector and you're essentially done.
Each mode (SPORT - RACE) comes with 9 steps-program so the driver can choose the one that suits his driving style. Each program adjusts the response by 3-6% so it can be fully adjustable and customized by each driver.
Pedal Lock Mode provides extra protection against unauthorized vehicle use. The driver can deactivate the acceleration ability of the vehicle when it's stationary through a 3 digit PIN. When Pedal lock is enabled the acceleration gets disabled and the vehicle stays on idle until you enter the correct PIN
Valet Mode limits the acceleration of the vehicle by 55 % - 65% - 75% (comes in 3 selectable levels). It is activated/deactivated through a 3 digit PIN. By limiting the acceleration there will be a significant reduce in vehicle's performance (Power and Torque).
MEMORY:
Sprint Booster also offers the option to the driver to completely remove the switch from the device. In this case the device will work with the last settings stored in memory. For example , if the driver disconnects the selector switch while in SPORT-5 (SPORT mode- Acceleration program 5), the device will keep as default the program SPORT-5.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1336 reviews
Sort
Product Reviews
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 5
The Easiest!
Size: 16AWG Wiring Harness-2 Leads
This is one of the best and easiest wiring system to install that I have every used. And the price is great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025