Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Camelot Fabrics Harry Potter Wizarding World Watercolor Quidditch Aqua 100% Cotton Fabric by The YardFabric by the Yard: Quantity of 1 = 1 yard or 36 inchesQuantity of 2 = 2 yards or 72 inchesQuantity of 3 = 3 yards or 108 inchesand so on.. Fabric by 6 Yards: Quantity of 1 = 6 Yards or 216 inchesQuantity of 2 = 12 Yards or 432 inchesand so on.. Fabric by The Bolt: Fabric by 14. 75 15 YardsQuantity of 1 = 14. 75 15 Yards or 540 inchesQuantity of 2 = 30 Yards or 1,080 inchesand so on.. Width: 43"Material: CottonMachine Wash Cold. No Bleach; Tumble Dry
Fabric by the Yard:Quantity of 1 = 1 yard or 36 inches
Quantity of 2 = 2 yards or 72 inches
Quantity of 3 = 3 yards or 108 inches
and so on..
Fabric by 6 Yards:
Quantity of 1 = 6 Yards or 216 inches
Quantity of 2 = 12 Yards or 432 inches
and so on..
Fabric by The Bolt:
Fabric by 14.75-15 Yards
Quantity of 1 = 14.75-15 Yards or 540 inches
Quantity of 2 = 30 Yards or 1,080 inches
and so on..
Width: 43"
Material: Cotton
Machine Wash Cold. No Bleach; Tumble Dry Low, Remove Promptly.
Can be used for any quilting or sewing project. Made of 100% cotton, you can coordinate these fabrics by color or theme to make any quilt or project personally your own. Use for quilting, quilt front, quilt back, pillows, mask cover, apparel, accessories, aprons, or anything you can think of.
ALL children's sleepwear sold in the US has to be chemically treated to be flame resistant OR be tight fitting. But Most retail fabrics being sold online are not for use of children's sleepwear. If you are trying to buy fabric and make children's sleepwear for resell commercially, please make sure to ask seller if the fabric has pass the standard for the flammability of children's sleepwear.
This fabric is not chemically treated to be flame resistant.
PLEASE NOTE: LICENSED PRODUCT CANNOT BE SHIPPED OUTSIDE OF THE USA, PUERTO RICO & CANADA. IT IS INTENDED FOR HOME USE ONLY, NOT FOR MANUFACTURING.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1718 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac.
At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025