SKU: 41970089922

Vanquish VS4-10 Ultra Black Anodized Origin Halfcab 1/10 RC Rock Crawler Kit VPS09006

$474.75 $527.50
Save 10%
No.2 Bestseller on nasasuma.com >

Pay in installments of $131.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 1 - Aug 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Vanquish VS4-10 Ultra Black Anodized Origin Halfcab 1/10 RC Rock Crawler Kit VPS09006VS4 10 ULTRA The VS4 10 Ultra represents the top tier of RC scale vehicle kits, providing the highest quality materials, superior design, and the most durable portal axle platform available in its market. The VS4 10 Ultra offers a list of features that have never been matched, providing a building and driving experience out of the box that are sure to impress. VS4 10 ULTRA PORTAL DRIVETRAIN The VS4 10 Ultra drivetrain utilizes the VFD Spec

VS4-10 ULTRA

The VS4-10 Ultra represents the top tier of RC scale vehicle kits, providing the highest quality materials, superior design, and the most durable portal axle platform available in its market. The VS4-10 Ultra offers a list of features that have never been matched, providing a building and driving experience out of the box that are sure to impress.

VS4-10 ULTRA PORTAL DRIVETRAIN

The VS4-10 Ultra drivetrain utilizes the VFD Spec transmission and our proven portal axle design you already know and trust. The licensed Currie Enterprises Portal F9 style front axle features an offset front differential housing and uses chromoly VVD axle shafts, chromoly portal box gears, 6mm output shafts, high-pinion hypoid ring gear, chromoly 6 bolt spool and patent pending one-piece bearing retainers to create an incredibly scale and durable front axle assembly. Integrated inner c-hubs create an unmatched scale look and are strengthened to provide the most durable axle housing possible, with easily replaceable chromoly threaded inserts for the knuckle kingpin screws. The rear Currie Portal F9 style axle features a centred differential housing and equal length chromoly axle shafts, with the same gears and spool found in the front axle.

  • VFD Spec Transmission
  • Currie Enterprise Portal Axle Housings
  • Portal Offset Front Pumpkin
  • Portal Centered Rear Pumpkin
  • High-Pinion Hypoid Axle Gears
  • 6-Bolt Ring Gear and Spool
  • Chromoly Portal Overdrive Gears F/R*
    Chromoly VVD front axles
  • 6mm Output shafts with M5 hex nut
    Integrated Inner C's
  • Chromoly Threaded Inserts
  • One-Piece Bearing Retainers (patent pending)
  • Aluminum Portal Knuckles with Scale High Steer Arm
  • Chromoly Rear Axle Shafts
  • Scale F9 3rd Members
  • Double Shear Shock Mounts
  • Aluminum 12mm Hexes for 6mm output shafts
  • Incision Steel Driveshafts
  • Full Ball Bearing

VFD SPEC TRANSMISSION

The VFD Spec Transmission from Vanquish Products is designed to provide an optimal balance of performance, scale appearance, strength and versatile optional accessories. The VFD’s design places the motor forward and as low as possible to keep the weight where you want it. The VFD’s combination of offset front T-case output and offset pumpkin of the Currie front axle make this possible. The T-case utilizes unique bearing plates for high strength bearing positioning and the elimination of flex found in traditional housings. The modular design of the bearing plates allow for optional gear ratios to be used inside the T-case.

  • Wide Profile Sintered Metal Gears
  • Overdrive Gear Set (6.5% OD)
  • Hardened Chromoly Shafts
  • Industry standard 32P spur gears
  • Low Motor Position (540 Size)
  • Full ball bearing transmission
  • Extended Skid Plate for Motor Protection
  • Offset front output for offset front axle configuration
  • Scale Moulded Transmission Housing
  • Moulded 6mm motor plate
  • Moulded Bearing Plates
    Moulded Spur Gear Cover
  • Optional Overdrive gear sets available
  • Top shaft with slipper eliminator

VS4-10 ULTRA CHASSIS

Vanquish Products VS4-10 Chassis is made to provide you with a balance scale looks and unhindered performance. The steel C-channel design provides scale detail, moulded front and rear cross members fill the chassis rails in the highest stress locations for ultimate strength and provide features like dual servo mounts, winch line routing, and a fuel cell. The moulded rock sliders come with a replaceable outer portion that perfectly fits the Origin Half-cab body. The VS4-10 chassis is developed to work with the included Vanquish Products VFD Spec transmission. The Panhard mount on the chassis is made from machined aluminium to withstand the impacts of severe trail conditions. Moulded shock towers capture the top of the 80mm Incision Scale Shocks in double shear for maximum support. The aluminium battery and electronics trays provide multiple locations for battery and electronics placement. Full width moulded front and rear bumpers increase approach and departure angles and allow for flexibility during impacts on the trail.

  • C-Channel Chassis Rails
  • Chassis Mounted Servo
  • Aluminium Panhard Mount
  • Double Shear Shock Mounting
  • Balanced Battery and Electronics Tray Arrangement
  • Moulded Front and Rear Bumpers
  • Moulded Rock Sliders
  • Moulded Lexan Inner Fenders
  • Servo Winch Mounting Location
  • Bodyside Retaining Guides
  • Optional Rear Upper Link Mounting Locations
  • Optional Front Upper Link Mounting Locations
  • Standard Chassis Bumper Mounting Geometry (Fits popular post style bumpers)

ORIGIN HALFCAB BODY
The Origin Halfcab polycarbonate body offers retro styling with a modern flair. The full polycarbonate interior was designed by Knight Customs with front bucket seats, a detailed dash and large cargo area in the back. The dash attaches to the interior and molded plastic details like steering wheel and gear shifter help bring the interior to life. The detailed front grill assembly is injection molded and features 10mm LED ready headlight buckets, with a scale radiator assembly, fans, and fan shrouds. In addition, the front light buckets can be replaced with optional Vanquish Rigid Industries Q-Series light pods for even more light! The rear light buckets fit 5mm LEDs, so everyone will take notice when you are coming or going. Other scale details like windshield wipers, door handles and fuel filler cap are included to step up the appearance even further. The entire body, interior and mounting holes are all laser cut – so all you need to worry about is paint.

  • Retro Halfcab Styling
  • Molded Front Grill
  • Full Interior
  • Separate Dash
  • Molded Steering Wheel and Gear Shifter
  • 10mm LED Ready Headlight Buckets
  • 5mm LED Ready Taillight Buckets
  • Molded Scale Radiator
  • Molded Fans and Shrouds
  • CNC Laser Cut
  • Extra Scale Details (Wipers, Door Handles, Fuel Filler)
  • Window Trim, Interior and Logo Decals
  • Paint Masks

VS4-10 ULTRA SUSPENSION
The VS4-10 features New Incision 80mm Scale shocks with aluminium threaded bodies, dual X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension provides scale looks by keeping the servo out of sight, while still providing room for large suspension travel. The suspension pivots on a full set of stainless steel links to keep the weight down low with a smooth transition from the link to the rod ends. All suspension mounts are sized to fit to the rod end pivot ball perfectly and eliminate excess side to side play.

  • Incision 80mm Scale Shocks
  • Incision 45mm scale springs (IRC00216)
    3-link with Panhard Front Suspension
  • Double Triangulated 4-link Rear Suspension
  • Incision Stainless Steel Links
  • Double Shear Shock Mounting
  • Multiple optional link mounting positions at the chassis for suspension tuning

KMC WHEELS AND VXT TIRES
The VS4-10 includes Incision KMC Machete plastic beadlock wheels and Vanquish VXT tires. The wheels are true beadlocks and are compatible with all Incision aluminium hub options. The VXT tires are 4.65" tall and are molded in a soft and sticky natural rubber compound for performance right out of the box. Firm foams are used to provide sidewall support that helps prevent the tire from rolling over, while keeping the tread in contact with the terrain.

  • Incision KMC Machete Beadlock Wheels
  • Adjustable Offset Design
  • VXT 4.65" Tires
  • Soft and Sticky Natural Rubber Compound
  • Firm Tire Foams

Specifications

  • 12.3" Wheelbase
  • 9.65" (245mm) Overall Width
  • 19.3" (490mm) Overall Length
  • 9.8" (250mm) Overall Height
  • 5.25:1 Overall Axle Ratio
  • 1.4:1 Portal Box Ratio (VPS08353 20/28 Overdrive Portal Gear Set Front and Rear)*
    Internal Trans Ratio: Front 2.95 / Rear 3.15
  • Overall Gear Ratio: Front 57.8 / Rear 61.7
  • Overdrive Percentage: 6.5%
  • 15T 32P Pinion for 3mm motor shaft Included
  • 56T 32P Spur Gear Included

Required Items

  • Shock Oil
  • Tools
  • Paint
  • Grease (VPS01017 Recommended)
  • Thread lock
  • Battery
  • Charger
  • Radio System
  • 540 size Motor (3mm Motor Shaft Recommended)
  • ESC
  • Steering Servo
  • Servo Horn (20mm Length Recommended)

NOTES:
*Front and Rear axles utilize VPS08353 20/28 Portal Overdrive Gear Sets for strength and overall gearing, to achieve a higher percentage of overdrive you will need to install VPS08354 18/30 and install into the rear axle.

  • VS4-10 Ultra is shown with items that are not included with the kit. Please see list of required items.
  • No electronics are supplied with the VS4-10 Ultra Kit.
  • No Receiver box is included with the VS4-10 Ultra kit.
  • Items and specifications are subject to change.
  • Assembly Required. Children 14 and under must have adult supervision.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 41970089922

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
abur
Louisville, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Louisville, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Grantham, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Louisville, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Waukegan, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019

recommand products

LS Fuzzy Romantic 3/4 Cardigan
98.00
Black x 'J' T-Shirt
18.00
Cascade Gold Necklace
98.00
Super Laptop Stand: Flex
84.99
Joint x Rolex - Submariner
5700.00