Pay in installments of $37.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
CURT 114973 - Class 1 Trailer Hitch 1-1/4in. Ball Mount Select Subaru Impreza Saab 9-2XConnect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle specific fit, manufactured with pride, finished for industry leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Saab 9 2X and Subaru Impreza (see application info to verify fitment). The hitch integrates
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Saab 9-2X and Subaru Impreza (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Specifications:
| Description_ABR | CL 1 |
| Description_ASC | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Impreza, Saab 9-2X |
| Description_ASM | CURT 114973 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Subaru Impreza, Saab 9-2X |
| Description_DES | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Impreza, Saab 9-2X |
| Description_EXT | CURT 114973 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Subaru Impreza, Saab 9-2X |
| Description_INV | Class 1 Trailer Hitch with Ball Mount |
| Description_KEY | 4 hidden hitchs box drawbar draw hauler bumper hole tite bar replacement adaptor cars 2000 2000lb 1.25 class-1 insert reciver oem auto coupler 1.25" one i max weld bolt 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 |
| Description_MKT | Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Saab 9-2X and Subaru Impreza (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation. |
| Description_SHO | Class 1 Hitch |
| Description_SLA | Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Saab 9-2X and Subaru Impreza (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation. |
| Description_ASC | Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Subaru Impreza, Saab 9-2X |
| Description_ASC | Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight |
| Description_ASC | Engineered with a vehicle-specific design for a custom fit |
| Description_ASC | Concealed main body for OE look and seamless integration with the vehicle |
| Description_ASC | Tested for safety in accordance with SAE J684 |
| Description_ASC | Precisely welded for superior strength and fit |
| Description_ASC | Protected by a durable high-gloss black powder coat finish |
| Description_ASC | Co-cured in a rust-resistant liquid A-coat, inside and out |
| Description_ASC | Equipped with an open-back receiver for easy cleaning |
| Description_ASC | 1-1/4" x 1-1/4" ball mount features a 3/4" hole to accept a trailer ball shank |
| Description_ASC | Ball mount can be flipped to provide drop or rise for level towing |
| Description_ASC | Limited lifetime warranty (one-year finish, one-year parts) |
| Description_ASC | Made in USA (may include imported hardware) |
| Description_DEF | Trailer Hitch |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Light and easy to move around! Still sturdy and tall like I wanted.
Color: Grey, Size: 2 Large Panels
Easily put together, work excellently for a room divider and taller than I am at 5'9" so that makes the privacy really great for our purposes. The feet turn and so you can get them out of a pathway as needed, the middle one that has two posts in it does not move but the end ones do. Very LIGHT so not hard to move around. Fabric is not see through. We have a lamp on one side and you can see the light through it but that is not an issue for us. The price is right!! most cubicle kinds of walls are so, so, so much money. With these being light and still give privacy the price was great. If you want them for sound, this is not the product for you but really most cubicle calls are not going to give you privacy other than visually anyway and these do that well. The size was accurate and so fit exactly how I needed them to and that was an important point for me. I used both of them in L shapes for my room and the size was right on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
★★★★★ 5
Almost perfect
Color: Black, Size: 2 Large Panels, Color: Black, Size: 2 Large Panels
The cloth material is sturdy and fits well on the design. Both sides are black and you can't tell a difference between each side. It's extremely light weight and easily movable. We got a double and a single and the single is used as a sliding door. It's definitely not the MOST stable thing but overall it's pretty stable, probably won't work GREAT on carpet. It's not see through at all, which is great, the only downfall is the gap between the two sides. We are using a blanket to cover the gap. It's not 6 foot tall, but you can adjust the feet on it to be taller. Overall it's a great product for the price and can easily be moved out of they way.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 5, 2024
★★★★★ 5
A decent buy
Color: Black, Size: 1 Large Panel
Easy to assemble, good quality fabric, the two horizontal "feet" are supposed to be stabilized by a knob/screw but its always looosening up with even the slightest move, so the only unfortunate thig is that it requires constant turning to tighten it if you adjust its location even a teensy bit. I used it as a backdrop to hold a design of balloons, then since the party I use it as a "semi" partition in a bedroom. Good value for the money since it can be used over and over.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 24, 2025
recommand products
TopZoo Solar Garden Stake Lights, Solar Firefly Lights Outdoor Decorative Waterproof for Outside Backyard Decor, Yard Decor, Garden Decor, Christmas, Warm White Round LED Bulb, 4 Packs
30.99
Bluetti B70 detachable battery for Multicooler and AC180T power station
199.50
Off-grid kit: Bluetti AC180P solar generator + Bluetti SORA220 foldable solar panel
764.50
ALSO GO Bamboo Shoe Rack 4 Tier Shoe Organizer for Closet Entryway Shoe Shelf Shoe Cabinet Free Standing Shoe Racks for Indoor Home Natural, 4 tier Wood Shoe Shelf Unit, 26.77''L x 9.84''Wx 28.74''H
49.99
CATGOOD Under Desk Elliptical, Portable Seated Elliptical with Remote Control, 12 Adjustable Speeds Ellipse Leg Excerciser, Dual Modes Elliptical Machine for Seniors
107.50