SKU: 75288861988

Namura Full Gasket Set

$127.79 $141.99
Save 10%
No.2 Bestseller on nasasuma.com >

Pay in installments of $35.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 2 - Aug 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Namura Full Gasket SetNamura gaskets are manufactured from materials specifically chosen for each individual application. From top end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand. Namura gaskets are manufactured to OE specs, which means no trimming or fitment issues. The materials are explicitly selected for their temperature, oil, fuel, and coolant resistant qualities as well as tested using ASTM standards.

Namura gaskets are manufactured from materials specifically chosen for each individual application. From top-end sets to complete kits for a full teardown, you can be sure that Namura gaskets are up to the task at hand.

Namura gaskets are manufactured to OE specs, which means no trimming or fitment issues. The materials are explicitly selected for their temperature, oil, fuel, and coolant-resistant qualities as well as tested using ASTM standards. Each design is evaluated against rigid quality-control standards to ensure each set meets or exceeds OE performance. Clutch gaskets are available for certain applications.

AF Gasket Material

Made from a high-quality, non-asbestos cellulose fibre composite bonded with Nitrile Butadiene rubber (NBR), this gasket material is ideal for clutch covers, oil pumps, coolant systems, and other engine case applications. It maintains excellent tensile strength, sealing integrity, and torque retention—even in continuous temperatures exceeding 300ºF.

Engineered for durability, it offers reliable performance in high-stress environments where fluid resistance and heat tolerance are essential.

Steel and MLS (Multi-Layer Steel) Gaskets

No other gasket is more crucial than your head gasket. The seal between your cylinder and cylinder head is exposed to more heat and extreme pressures than anywhere else in your engine. In order to match these extreme conditions, Namura offers one of the most advanced head gaskets on the market. Constructed from multiple layers of stainless steel to resist corrosion and erosive chemicals commonly found in your engine, then using an on-off pattern, our MLS gaskets are coated/embossed with a Fluoroelastomer-based rubber to tightly seal the metallic mating surfaces. By doing this they can withstand the sheering forces created by the two surfaces (cylinder head and cylinder). This coating also enhances the bond between the gasket material and the imperfect surfaces commonly found when rebuilding your engine.

Seals and O-rings

NBR, Fluoroviton, and Silicone are selected for each application based upon the following characteristics: Temperature Resistance, Abrasion Resistance, Chemical Resistance, and their Aniline Point. A Teflon coating is applied to certain applications to prolong performance life.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 75288861988

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Andrew
Belleville, US
★★★★★ 5
Good shelves!
Easy enough to assemble and as shown in the pictures you can shape the shelves how you want them. There is one screw hole in the mounting bracket right in the narrow part which makes it difficult to get a screw into. To get around this I just put a screw in at an angle. The quality is decent and I would not overload these by any means. However, if you are looking for cheaper shelves that look decent for light items these will work great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2025
J
Verified Purchase
Jan
Boise, US
★★★★★ 3
Great shelves for the price (~$15), but could be better.
Unlike many others here reviewing the item, I took note of the dimensions & the rough surface of the wood *before* purchasing it & read the instructions that tells you how NOT to assemble it. So my review won't be mentioning how it was smaller than I expected, how unexpectedly rough the wood was, or the fact that it fell off my wall because I didn't read the instructions. About how NOT to install it- never screw into the board such that the weight is relying on the *screws* to keep it up. Whichever way you place the brackets in relation to the wood, above or below, make sure the weight is ON THE BRACKETS. In other words, *never* screw in from THE TOP OF the shelf. The instructions specifically point this out, so if you see any reviews about the screws stripping out of the wood and the thing crashing to the floor-- they didn't read the instructions and they assembled it incorrectly. And no, unlike what some reviews here are telling you, it is not painted plastic. It is wood. I sanded it, it's wood. They tell you that in the description of the item, too. Paulownia, but yes, the weight of it reminds you of styrofoam, which isn't a bad thing. Ive read its a sturdy wood, relative to how much it weighs. I was already expecting rough boards when I bought it, but on top of that fact the surface had the grossest hand-feel I've ever felt (probably from the surface + the paint they used) that I ended up lightly sanding it with 120 grit (which helped a ton with the feel while also doing very little to the painted surface) and painted it with some white paint that we had on hand (it was originally grey). Much better. The brackets getting in the way of screwing is awful because I don't have a 90° angle screwdriver, but it worked out alright enough. The resulting angle wasn't severe by any means, but still I recommend making sure you have a 90° angle screwdriver before purchasing because I'd much rather it be nice, clean, flush screws. One point of serious suggestion for the seller would be that the brackets need more than a quick dot of welding. Even though my brackets came relatively even and all with unbroken welding, judging from other reviews and looking at mine, this is an area that could definitely do with some improvement. Another suggestion for the seller would be to include a few extra drywall anchors. I ended up breaking three of them trying to get them in my drywall and now I have to go find some replacements. I think our drywall is about as petrified as our studs because in looking up external sources for the best method of installing these types of anchors (to make sure I wouldn't break any. smh) they recommend to NOT predrill, as these are made with no predrilling in mind. However, when trying to initially gently hammer them in with my rubber mallet as the instructions stated, they just weren't penetrating the drywall very far and I even made sure to pierce the paint layer (which is recommended if your walls have a thick layer of paint from over the years). I actually ended up quite extensively drilling in order to get the first portion of the anchors (before the threads) into the wall without doing too much damage to the anchors. Ive gotten two of the three shelves up but can't get the last one up until I get more drywall anchors. So far so good. Lightly hand sanded and a couple coats of paint slapped on them and I quite like them. Definitely takes a lot of time installing them though, so expect that before going into it. Rated 3 stars for the gross hand-feel, the brackets needing more welding, the brackets that could've been more even with each other, the lack of warning that you'd need a 90° angle screwdriver, and the lack of backup drywall anchors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2023
A
Verified Purchase
Amazon Customer
Battle Creek, US
★★★★★ 5
WOULD buy again!!
Color: Dark Brown
VERY STURDY! Id buy them again. Easy to clean & hang on the wall. Look good hanging up. Weight capacity is more then i thought it would be.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2026
D
Verified Purchase
Danielle M.
Cuba, US
★★★★★ 5
style, durability, and functionality
The Amada HOMEFURNISHING Floating Wall Shelves offer a perfect blend of style, durability, and functionality. Whether you're looking to display decorative items or need extra storage space, these shelves are a valuable addition to any room. Their easy installation and sturdy design make them a worthwhile investment for enhancing your home's decor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2025
K
Verified Purchase
Kate Jarvis
Draper, US
★★★★★ 5
Sleek look & strong hold.
Excellent shelves! We like the sleek look of the wood/metal contrast of the hardware. The product arrived in great condition and came with easy to install pieces. Instructions were easy to follow. After installation they have held up extremely well. Great to display anything you like that fits and even sturdy enough to hold a 10lb cat. ( No, he is not allowed up there but the shelf he jumps on always holds.) 5/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026

recommand products

Brandit Windbreaker Anorak Dark Camo – Summer Rain Jacket Outdoor Hiking
65.87
US Army Style Field Warm Acrylic Watch Cap With Visor OD Green
31.80
Army Military Tactical Combat Flexible Balaclava Open OD Green
33.90
MIL-TEC Anorak Combat Jacket Winter Camouflage Windproof Hooded Lined Woodland
91.08
Original Austrian Army Military Mess Ki, aluminium OD Green 3 Parts Used
47.52