Low Profile Portable Lifeguard Stand 30-inch Seat Height

Low Profile Portable Lifeguard Stand 30-inch Seat HeightLow Profile Portable Lifeguard Stand with a Seat Height 30 inches Tall, and is considered a Short Lifeguard Chair with a Large Observation Platform, that allows the lifeguard to easily scan large pool areas in a short amount of time. The Low Profile Guard Chair allows the flexibility of moving the guard station to different viewpoints around the pool as needed. Required Deck Space is 38" x 42". Stand color is available in Radiant White. Handrails and

Low Profile Portable Lifeguard Stand with a Seat Height 30-inches Tall, and is considered a Short Lifeguard Chair with a Large Observation Platform, that allows the lifeguard to easily scan large pool areas in a short amount of time.   The Low Profile Guard Chair allows the flexibility of moving the guard station to different viewpoints around the pool as needed. 

Required Deck Space is 38" x 42".  Stand color is available in Radiant White. Handrails and seat post are 304 stainless steel.  Two Back Wheels for Easy Re-positioning.

KEY FEATURES

• Portable unit features two wheels for the flexibility to move lifeguard station as needed

• Seat swivels 360-degrees for a full view of the facility.

• Observation platform features a non-slip, white, sanded tread.

• Stainless steel Hand Rails, Seat Post, and Base for added corrosion resistance

Footboard: The observation platform (footboard) of the Low Profile Lifeguard Stand measures 1-5/8”x 38" x 42" and is a solid laminated fir core covered with fiberglass reinforced acrylic,.  The top surface is a non-skid sanded tread.

Frame: The frame is constructed of polished, 1.90” O.D. x .065 wall, Type 304 stainless steel.   The frame consists of five legs and a platform support interlocked together. All bends have a nominal bend radius of 6”.  Each of the five legs utilizes a blue rubber bumper to protect the deck.  The stand is equipped with a rescue tube holder.

Swivel Stand w/ Umbrella Holder:  The base column of the swivel stand assembly is constructed of 1.90” O.D. x .065” wall, Type 304 stainless steel.  At the lower end of the column is affixed a 0.25” stainless steel plate which serves as a mounting flange. This flange is attached in tandem with the observation platform (footboard) to the platform supports.  A 1.90” O.D. x .065 wall, Type 304 stainless steel tube is bent and affixed to the rear of the seat base column and serves as an umbrella holder.  

Seat w/ Swivel: A special swivel mechanism is attached to the upper end of the swivel stand base column to allow for a 360 ̊ rotation of the contoured, low-side fiberglass seat.

Wheels:  6” diameter x 2” wide rubber wheels with cast iron core are attached to the frame to facilitate moving of the lifeguard stand when needed.

Depending upon installation design, local codes, and site requirements, this model is suitable for use on both commercial and competition pools.  In addition, these stands are well suited for use as judging and observation stands on tennis courts and other sporting sites, especially those where permanent installation is not required.

Shipping Weight Approx 100-Lbs. (3-Boxes), Motor Freight Carrier.

26"L x 20"W x 11"H, 25"L x 20"W x 9"H, and 60"L x 79"W x 8"H