Pay in installments of $55.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 13 - Aug 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Air Filter for Nissan Hardbody 3.2D QD32 & NP300 2.5TDi YD25DDTi - CA12309Vehicle Fitment & Part Details This air filter is listed for the Nissan Hardbody 3. 2D QD32 (1999 2003) and Nissan NP300 2. 5TDi YD25DDTi (2009 ), with Nissan OE reference 16546 2S600. Confirm compatibility by matching the listed OEM reference numbers, fitment details, and VIN engine chassis information where variants exist. Key Details SKU CA12309 Component Air Filter Primary Fitment Nissan Hardbody 3. 2D QD32 (1999 2003) Specs Filter insert, 186mm
Vehicle Fitment & Part Details
This air filter is listed for the Nissan Hardbody 3.2D QD32 (1999-2003) and Nissan NP300 2.5TDi YD25DDTi (2009-), with Nissan OE reference 16546-2S600. Confirm compatibility by matching the listed OEM reference numbers, fitment details, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- CA12309
- Component
- Air Filter
- Primary Fitment
- Nissan Hardbody 3.2D QD32 (1999-2003)
- Specs
- Filter insert, 186mm height, 147mm OD, 72mm ID
Product Specifications
| Specification | Value |
|---|---|
| Filter Type | Filter Insert |
| Height | 186mm |
| Outer Diameter | 147mm |
| Inner Diameter | 72mm |
OEM Reference Numbers
- Nissan: 16546-2S600, 16546-2S601, 16546-2S602, AY120-NS037
- Isuzu: 8979410260
Vehicle Fitment
| Model | Engine | Power | Years |
|---|---|---|---|
| Nissan Hardbody 3.2D | QD32 | 99.2kW | 1999-2003 |
| Nissan Hardbody 3.2D 4x4 | QD32 | 99.2kW | 1999-2003 |
| Nissan NP300 2.5TDi H-R | YD25DDTi | 89kW | 2009- |
| Nissan NP300 2.5TDi W/H | YD25DDTi | 89kW | 2009- |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
- This is a filter insert — confirm height, outer diameter, and inner diameter against the removed filter before fitting.
Installation / Use / Maintenance Tips
- Compare the new filter insert to the removed filter before installation to confirm height, outer diameter, and inner diameter match.
- Clean the air filter housing and sealing surfaces before fitting the new filter.
- Ensure the filter seats correctly inside the housing and the lid closes fully without distortion.
- Replace at the manufacturer's recommended service interval or sooner in dusty operating conditions.
Common Questions
Will this air filter fit my Nissan Hardbody or NP300?
This part (CA12309) is listed for the fitments shown on this page. Confirm by matching the fitment details, OEM reference numbers, and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Cross-reference numbers are listed in the OEM Reference Numbers section above. Match at least one to your original part before ordering.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 5
Easy hanging
Size: 31x7 2Pcs, Color: Black
Great size and easy to hang. Have purchased many for my home.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Look great!
Size: 40x7 2Pcs, Color: Black
Love the way these turned out in my office! I connected 3 shelves in a row across the wall to make one long shelf and it looks great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 3
Nice looking. Not very sturdy. Easy to install.
Size: 40x7 2Pcs, Color: White, Size: 40x7 2Pcs, Color: White
Update: The shelf slopes at about a 45° angle when you put anything more than about a pound on the outside edge of it. Perfectly fine up against the wall. Just seems like the braces inside aren't long enough to really give the stability needed. Bracket is nice and tight against the wall. Had to add braces underneath to hold a small plant, a photo and a small container. Wa sloping more and more each week
The shelves look great and we're pretty easy to install. They have a single bracket that is very easy to mount to the wall and get nice and level..
The downside is that the bracket isn't long enough to go between studs. This seems like a pretty simple oversight. I mean why wouldn't you make it long enough to go stud to stud?
Secondly and maybe more fatally the bars that go inside the shelf to support them coming out from the wall are significantly shorter than the depth of the shelf. Unfortunately this means the shelf is only supported the first few inches coming out from the wall so there is the potential for a slight lean forward..
The anchors they send are trash. Cheap soft plastic that just tears and bends with a screwdriver. I would suggest spending $2 and grabbing your own anchors from Ace or home Depot.
The shelves are essentially made of a high grade cardboard kind of wood. They are not going to support much weight or last for years and years however there incredibly affordable and look nice and easy to install. Long as your expectations are right you'll be happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2023
★★★★★ 5
Great product.
Size: 24x6 2Pcs, Color: Black
Very good sturdy item
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Worth it if you're a figure/doll collector!
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
I ordered these shelves to display my figures and dolls, and I love the way they look! I ordered 2 sets of the 4 pack in black with black hardware. After looking at reviews, I took the jump and bought them and don't regret it!
TL;DR: Listing is accurate, don't use the paper measurement thingy, quality is what you'd expect for the price, doesn't come pre-drilled, easy enough to put together, over all worth it if you're looking for smaller, decent quality, decent price shelves especially if you display figures or dolls.
1. Listing: They are accurate to the measurements! They're only 5.5 inches deep, so there isn't much (if at all) any room for layering. They do feel small, but the listing is accurate!! Mine are paired next to each other to create a "longer" shelf. DO NOT use the paper measurement thingy. Another review mentioned it was un-even, and after holding it to mine, yeah, it was off. I'd highly recommend a stud finder, small leveler, and a white gel pen or marker to mark where to drill if you do.
2. Assembling & Mounting: The shelves didn't come with pre-drilled holes for the mounting options because it was easy enough to screw into. I will warn you that the small screws only came with a singular extra, so be careful about losing them in case it's the same for you... I'd highly recommend doing this on a FLAT surface. I stood the shelves on the side that would be flat against the wall and set the brackets against it. I put one screw in on each side (both brackets have 1 screw to hold them where I want) then I laid it on its top and tightened and added the other screw. I may have done more work than needed, but none of mine are leaning forward or backward super far. I used the "load bearing" mount simply because I like the look but if you intend to put books, I would do the "no drop" design and possibly get some other L brackets for more support since books can get heavy. PLAN WHERE YOU WANT THE BRACKETS if you intend on doing the "load bearing" design or adding any more brackets.
4. Quality: I kind of expected the wood to be a bit thicker/more sturdy feeling, but upon realizing they didn't come pre-drilled, it made more sense. THEY CHIP AND SCRATCH EASILY. If you're like me and don't really care as long as you cant see/don't notice it, then this isn't any concern but they may come damaged cause some of our mail couriers aren't the best. If you stick them in the corner like I did, please be careful about it slipping! I accidentally dropped the second one from a 21-inch TV stand after adding brackets, and the corner chipped (yes, I measured). The hardware is standard screw quality, and the brackets could be better. After reading the broken bracket reviews plus the price, I honestly wasn't expecting much, but they aren't too bad! You can always replace them with another one you like!
5. Overall: I'd say these are worth the price and I see why "customers usually keep this item"! They were easy enough to mount, even if you aren't the handiest man out there. I'd definitely recommend these if you're looking to display anime figures or dolls like I do! They're nice for adding vertical space without sticking out of the wall too much! Definitely good for smaller spaces! I'm very happy with this product and will more than likely return to this listing if I want some decent and affordable shelving!
Thank you for reading my review, Im usually hesitant to buy online so I hope it helps you decide if you wanna buy these shelves as well!
(Also, in case anyone is wondering the layout, the longest shelf will be 1, the middle length will be 2, the shortest length will be 3. It's the last image of the review!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
recommand products
Single Shoot Single Row Boot & Opener Kit
139.00
Crown Automotive Jeep Replacement J3124570 Transfer Case Output Shaft Bearing
27.00
Via Monfalcone, Santa Rita, Turin, Torino, Piemont, 10136, Italy
57.00
306, Rue Duguesclin, Saint-Amour, Lyon 3e Arrondissement, Lyon, Lyon, Métropole de Lyon, Departemental constituency of Rhône, Auvergne-Rhône-Alpes, Metropolitan France, 69003, France
105.00
HKM-2893629 LED Night Dog Walking Vest with Multi-Color Transformation Straps
69.99