SKU: 27082395167

Redtiger USB-C Auto Dashcam Continue Voeding Hardwire Kabel Voeding Kit [3.5M 12v/24v]

Sale price$30.56 Regular price$33.95
Save 10%

Pay in installments of $8.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 14 - Aug 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Redtiger USB-C Auto Dashcam Continue Voeding Hardwire Kabel Voeding Kit [3.5M 12v/24v]Redtiger USBC Auto Dashcam Continue Voeding Hardwire Kabel Voeding [3. 5M 12v 24v] De Redtiger HW01DT kabelset is de perfecte oplossing voor bestuurders die op zoek zijn naar een betrouwbare manier om hun dashcam van stroom te voorzien. Met functies zoals lage spanningsbescherming en parkeermonitoring biedt dit product gemoedsrust en veiligheid in elke situatie. Beschrijving Bescherming tegen batterijontlading De Redtiger kit beschermt de accu van je

Redtiger USBC Auto Dashcam Continue Voeding Hardwire Kabel Voeding [3.5M 12v/24v]

De Redtiger HW01DT kabelset is de perfecte oplossing voor bestuurders die op zoek zijn naar een betrouwbare manier om hun dashcam van stroom te voorzien. Met functies zoals lage spanningsbescherming en parkeermonitoring biedt dit product gemoedsrust en veiligheid in elke situatie.

Beschrijving

Bescherming tegen batterijontlading De Redtiger kit beschermt de accu van je voertuig met een automatische uitschakelfunctie bij lage spanning. Wanneer de spanning onder de 11,8 V (+0,2) komt, wordt de stroomtoevoer na 60 seconden onderbroken. Dankzij deze oplossing blijft er voldoende energie over om de motor te starten, zelfs na een lange stilstand.

Eenvoudige installatie De installatie van de Redtiger HW01DT kit vereist geen gespecialiseerde kennis. De set wordt geleverd met gedetailleerde instructies en verschillende soorten zekeringen (Medium, Small, Mini, Micro) die geschikt zijn voor de meeste voertuigen. De draden zijn duidelijk gemarkeerd de zwarte draad is voor de aarding, de gele voor constante stroom, en de rode voor ACCstroom. De kit bevat een 3,5 meter lange kabel, die voldoende flexibiliteit biedt tijdens de installatie. De componenten zijn zo ontworpen dat ze eenvoudig verborgen kunnen worden, zodat het esthetische uiterlijk van het voertuig behouden blijft.

24uurs parkeermonitoring De Redtiger kit stelt je in staat om de omgeving van je voertuig continu te monitoren, zelfs wanneer de motor is uitgeschakeld. Hiermee kan je dashcam alles vastleggen wat er rondom de auto gebeurt, en geniet je van extra bescherming tegen potentiële bedreigingen. De kabels zijn verkrijgbaar in versies met Micro USB en USBC poorten voor compatibiliteit met een breed scala aan apparaten. Een constante uitgang van 5V/2.5A garandeert stabiele stroomvoorziening voor je dashcam of andere apparaten.

Inbegrepen in de set:

  • 3,5 meter lange voedingskabel
  • 4 soorten zekeringen: Medium, Small, Mini, Micro
  • Installatiehandleiding

Specificaties

  • Fabrikant: Redtiger
  • Model: HW01DT
  • Ingang: DC 12V24V
  • Uitgang: 5V2.5A USBC
  • Lage spanningsbescherming: Automatische uitschakeling wanneer de spanning onder de 11.8V (+0.2) komt
  • Kabellengte: 3,5 meter
  • Zekeringtypen: Medium, Small, Mini, Micro

De Redtiger HW01DT kit biedt een betrouwbare stroomvoorziening en extra veiligheid voor je voertuig, vooral bij langdurig parkeren.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 27082395167

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Lexington, US
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
A
Verified Purchase
abur
Waukegan, US
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together. Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there. This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
N
Verified Purchase
Nancy
Charlottesville, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Natrona Heights, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Los Angeles, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020

recommand products