SKU: 36142976369

e27325

Sale price$126.00 Regular price$140.00
Save 10%

Pay in installments of $35.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 14 - Aug 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

e27325Inno Sense De Inno Sense bitten van TRUST zijn speciaal ontwikkeld voor gevoelige monden en jonge paarden. Het kunststof is FDA goedgekeurd, niet giftig en bevat geen weekmakers. De flexibele roestvrijstalen kern zorgt voor stevigheid en duurzaamheid, terwijl het bit zacht en comfortabel blijft voor je paard. Inno Sense mondstukken zijn verkrijgbaar in twee diktes, aangegeven in de productnaam met een cijfer. De 15 mm variant is de slim fit

Inno Sense

De Inno Sense bitten van TRUST zijn speciaal ontwikkeld voor gevoelige monden en jonge paarden. Het kunststof is FDA-goedgekeurd, niet giftig en bevat geen weekmakers. De flexibele roestvrijstalen kern zorgt voor stevigheid en duurzaamheid, terwijl het bit zacht en comfortabel blijft voor je paard.

Inno Sense-mondstukken zijn verkrijgbaar in twee diktes, aangegeven in de productnaam met een cijfer. De 15 mm-variant is de slim fit-uitvoering—ideaal voor paarden met een kleinere mond of voor gebruik in een stang-en-trens combinatie. De 20 mm-variant is onze standaarddikte en geschikt voor een breed scala aan paarden.

Paarden accepteren de Inno Sense bitten vaak snel en volgen de hand van de ruiter met gemak. Wanneer het bit goed op de lagen ligt - het tandloze deel van de kaak - wordt contact met de tanden of kiezen vermeden. Toch kan schade ontstaan bij paarden met gebitsproblemen of die het bit optillen met hun tong. Omdat het materiaal flexibel is, valt schade door bijten niet onder de garantie van TRUST Equestrian.

Elk paard is anders, en het kiezen van het juiste bit is essentieel voor comfort, heldere communicatie en goede prestaties. Een goed passend bit voorkomt drukplekken, schuiven in de mond en knellingen bij de mondhoeken—en draagt bij aan ontspanning en vertrouwen in de aanleuning.

Heb je hulp nodig bij het kiezen van het juiste model, materiaal of maat bit voor je paard? Neem gerust contact met ons op of vul het bitadviesformulier in - we helpen je graag verder.

Bustrens

De bustrens is een van de meest stabiele bitringen die je kunt kiezen. Door de vaste ringen ligt het bit rustig en stil in de mond, zonder veel beweging. Dit zorgt voor een constante ligging én een directe verbinding met je hand.

Omdat de ringen niet kunnen schuiven, voorkom je bovendien dat de mondhoeken bekneld raken - bitringen zijn dus niet nodig. Een fijne keuze voor ruiters die houden van duidelijkheid en rust in de communicatie met hun paard.

Gag

Het gag-bit is ontworpen om het paard aan te moedigen het hoofd hoger te dragen. De drukpunten liggen op de nek, net achter de oren (poll), en in de mondhoeken. Het gag-bit kan worden gebruikt met één of twee teugels, maar wordt meestal gereden met twee teugels: één aan de grote ring en één aan de beweegbare gag-ring. Zo kan de ruiter de inwerking van het bit nauwkeuriger doseren.

Let op: het standaard bakstuk van het hoofdstel wordt vervangen door een speciaal gag-bakstuk. Door de druk die dit bit op de nek kan uitoefenen, is het alleen geschikt voor ervaren ruiters of gebruik onder begeleiding van een trainer. Zorgvuldige afstelling en correct gebruik zijn essentieel voor het welzijn van het paard.

Port Medium

De Inno Sense Port Medium is gemaakt van elastisch synthetisch materiaal en voelt steviger aan dan de Flexi Soft. Het licht flexibele mondstuk is voorzien van een tongboog die de tong meer vrijheid geeft en de druk meer op de lagen richt. Geschikt voor paarden die baat hebben bij tongvrijheid, maar toch duidelijke aanleuning wensen.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36142976369

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Michael A. Adkins
Alexandria, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Charlottesville, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Louisville, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Grantham, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
D
Verified Purchase
Daniel G Forster
Grantham, US
★★★★★ 3
It’s about support more than anything else !
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer worked great until it didn’t. Cleared a paper jam that kept giving an issue. Then it gave a scanner error, after paper jam was resolved. I called support; they gathered all my info. Transferred me to someone else who then told me she’d email me some numbers to call for deals on refurbished printers or onsite support. I ended ups solving the problem… I threw the printer in the trash, and will likely not buy anymore epson products. I was willing to pay for service but not waste more time and making more phone calls. I had a credit card; i was willing to use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 12, 2026

recommand products