CRESCENT Rebar Cutter and Bender - GW 0590RBJNCRESCENT Rebar Cutter and Bender GW 0590RBJN The H. K. Porter rebar cutter and bender is perfect for any job site where rebar needs to be cut to length or bent to fit into forms. The tool's shear cutting head is capable of cutting and bending up to 5 8 inch thick (#5) steel rebar. Cutting head and lower bar are designed to be easily mounted to a bench or work station allowing for increased leverage. Features: Shear cut blades Cuts and bends to 90 deg

CRESCENT Rebar Cutter and Bender - GW 0590RBJN

The H.K. Porter rebar cutter and bender is perfect for any job site where rebar needs to be cut to length or bent to fit into forms. The tool's shear cutting head is capable of cutting and bending up to 5/8-inch thick (#5) steel rebar. Cutting head and lower bar are designed to be easily mounted to a bench or work station allowing for increased leverage.

Features:

• Shear-cut blades
• Cuts and bends to 90 deg or 180 deg
• Mounts on most flat surfaces to enhance leverage and increase safety
• Maximum rebar size capacity - 5/8 inches
• Steel construction for durability
• Never use any H.K. Porter cutters on electrified circuits, wire, or cable

Specifications:

• End: Rebar Bender
• Extendable Length: No
• Handle Color: Red
• Handle Length: 42.5 in
• Handled: Yes
• Indexing: No
• Jaw Capacity: 0.625 in
• Material: Steel
• Overall Height: 10.43 in
• Overall Length: 52.0 in
• Overall Width: 9.25 in
• Prop 65 Warning: This product contains or produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm
• Warranty: Full Lifetime
• Weight: 44.00 lb