ULTRACURVE 1000 Cosmic Shift Ltd Edition

ULTRACURVE 1000 Cosmic Shift Ltd EditionUltracurve 1000 Apollo Silver Ltd Edition is a 254 micron flexible clear, silver metallic flake vinyl overlaminate, backed with an optically clear pressure sensitive acrylic adhesive system, specifically engineered to adhere to print media. Ultracurve 1000 combined with Ultracurve 660LSE print media is the industry leading combination for premium motocross graphics and decals. Recommended Uses Substance Incorporated recommends the following end uses

Ultracurve 1000 Apollo Silver Ltd Edition is a 254 micron flexible clear, silver metallic flake vinyl overlaminate, backed with an optically clear pressure-sensitive acrylic adhesive system, specifically engineered to adhere to print media. Ultracurve 1000 combined with Ultracurve 660LSE print media is the industry-leading combination for premium motocross graphics and decals.

 

Recommended Uses

Substance Incorporated recommends the following end uses for Ultracurve 1000: Market-leading graphics for Motocross Bikes and ATVs.
Decals and Graphics for Karts, Snowmobiles, and Side-X-Sides.
Helmet decals and wraps for MX, Football, Baseball, Lacrosse, Hockey, and Industrial. Demanding industrial applications that require additional impact/abrasion resistance.

 

Performance

Ultracurve 1000
Material	254 micron Engineered Calendered Vinyl
Colour	Clear
Tensile Strength	336N/25mm
Adhesive	Clear Solvent-Based Pressure Sensitive Acrylic
Adhesive Thickness	0.056mm +/- 10%
Peel Adhesion	24N/25mm from Stainless Steel
Liner	90LB Natural Brown PE Coated Layflat Paper
Liner Release	32 grams/25mm
Dimensional Stability	0.8 mm
Application Temp.	5°C to 27°C recommended, test prior to specific application
Temperature Range	-53°C to 104°C
Shelf Life	6 months when stored at 21°C and 50% relative humidity
Print Compatability	N/A
Graphic Life	Outdoor durability up to 3 years, permanent
Chemical Resistence	Resists mild acids, mild akalis, solvents, and salts. Excellent resistance to water, including immersion.

 

Installation

Before applying an overlaminate, allow 24-48 hours for print to dry. Application surface must be free of dust, dirt, debris, grease, and other contaminants. We highly recommend cleaning the installation surface with isopropyl alcohol prior to application. Mild heat may be used during installation to help Ultracurve 1000 conform to irregular surfaces.