JL Audio XDM700/5 : 5ch Marine Amplifier, 75W x 4ch + 300W @ 2Ω

JL Audio XDM700/5 : 5ch Marine Amplifier, 75W x 4ch + 300W @ 2ΩXDM Series Five Channel Class D Marine Grade Amplifier, 75 Watts x Four Channels @ 4 Ohm and 300 Watt Mono @ 2 Ohm. The XDM700 5 is ideal for a complete audiophile grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75W x 4 @ 4), while also generating a solid 300W of power for a

XDM-Series Five-Channel Class-D Marine-Grade Amplifier, 75-Watts x Four-Channels @ 4-Ohm and 300-Watt Mono @ 2-Ohm.

The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75W x 4 @ 4Ω), while also generating a solid 300W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is JL-Audio's high-speed NexD switching amplifier design.

Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

The XDM700/5 includes a 12dB / octave high-pass filter for one main channel pair, a 12dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500Hz or 500-5000Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Output Specifications

• Main Channels @ 4 Ω	75 W RMS x 4 @ 14.4V
  Main Channels @ 2 Ω	100 W RMS x 4 @ 14.4V
  Main Channels - Bridged @ 4Ω	200 W RMS x 2 @ 14.4V
  Subwoofer Channel @ 4 Ω	180 W RMS x 1 @ 14.4V
  Subwoofer Channel @ 3 Ω	240 W RMS x 1 @ 14.4V
  Subwoofer Channel @ 2 Ω	300 W RMS x 1 @ 14.4V
  Subwoofer Channel @ 1.5 Ω	N/A

• Main Channels @ 4 Ω	60 W RMS x 4 @ 12.5V
  Main Channels @ 2 Ω	90 W RMS x 4 @ 12.5V
  Main Channels - Bridged @ 4Ω	180 W RMS x 2 @ 12.5V
  Subwoofer Channel @ 4 Ω	180 W RMS x 1 @ 12.5V
  Subwoofer Channel @ 3 Ω	240 W RMS x 1 @ 12.5V
  Subwoofer Channel @ 2 Ω	300 W RMS x 1 @ 12.5V
  Subwoofer Channel @ 1.5 Ω	N/A

General Specifications

• Frequency Response (Main Channels)	12 Hz - 22 kHz (+0, -1dB)
  Frequency Response (Subwoofer Channel)	10 Hz - 1 kHz (+0, -1dB)
  S/N Ratio, referred to highest rated power (Main Channels)	>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  S/N Ratio, referred to 1 W	>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  Damping Factor @ 4 Ω	>150 / 50 Hz
  Damping Factor @ 2 Ω	>75 / 50 Hz
  THD+N @ Rated Power (Main Channels)	<1% @ 2 Ω per Ch.
  THD+N @ Rated Power (Subwoofer Channels)	<1% @ 2 Ω per Ch.
  Input Voltage Range @ RCA Inputs	200 mV - 4 V RMS
  Min.Copper Power / Ground Wire Gauge	4 AWG wire
  Fuse Rating	60 A (AFS, AGU or MaxiFuse™)

Amplifier Settings

• Filter Mode(s): Channels 1 & 2 (front)	High-Pass only
  Filter Slope(s): Channels 1 & 2 (front)	12 dB/octave
  Filter Frequency Range: Channels 1 & 2 (front)	50 Hz - 5 kHz
  Filter Mode(s): Channels 3 & 4 (rear)	High-Pass or Bandpass
  Filter Slope(s): Channels 3 & 4 (rear)	12 dB/octave
  Filter Frequency Range: Channels 3 & 4	50 Hz - 500 Hz
  Filter Mode(s): Subwoofer Channel	Low-Pass only
  Filter Slope(s): Subwoofer Channel	12/24 dB/octave
  Filter Frequency Range: Subwoofer Channel	50 Hz - 500 Hz
  Detented, Calibrated Filter Freq. Potentiometers	Yes
  Filter Defeat Function	Yes
  Infrasonic Filter: Subwoofer Channel	none
  Remote Level Control	Optional HD-RLC or MHD-RLC (water-resistant)
  Remote Level Modes	Sub Ch. or All Channels
  Channel Input Mode Switch	Yes (2/4/6 ch.)
  Pass-Through Preamp Output	None
  Source Channel Selection for PreOuts	N/A

Dimensions

• Height (H)	2.05 in / 52 mm
  Width (W)	10.23 in / 260 mm
  Depth (D)	7.09 in / 180 mm
  Net Weight	6.15 lb / 2.79 kg

Documentation

• JL Audio XDM700/5 Manual