FuseBox SPDCUKITT2 Type 2 Surge Protection Device with 32A MCB & Cables

FuseBox SPDCUKITT2 Type 2 Surge Protection Device with 32A MCB & CablesFuseBox Type 2 Surge Protection Device with 32A MCB & Cables Features of the Surge Protection Devices range Devices have indicators to advise end of life of the device No resetting of SPD required, the excess voltage is quickly taken to earth, before the rest of the circuits are damaged The device meets the requirements of the IEC 61634 1 and EN 61643 11 standards The SPD enclosure can be fitted next to any exiting or new consumer unit of any brand

FuseBox Type 2 Surge Protection Device with 32A MCB & Cables

Features of the Surge Protection Devices range

• Devices have indicators to advise end of life of the device
• No resetting of SPD required, the excess voltage is quickly taken to earth, before the rest of the circuits are damaged
• The device meets the requirements of the IEC 61634-1 and EN 61643-11 standards
• The SPD enclosure can be fitted next to any exiting or new consumer unit of any brand where surge protection is required

Type 2 Surge Protection Devices
This Type 2 Surge Protection Device provides superior protection against Transient overvoltages, by diverting the surge to earth within <25ns. And protecting all loads/circuits connected to the consumer unit.

This item is Type 2 Surge Protection Device with 32A MCB & Cables

Features

• Type 2 Single Phase Surge Device + 32A B Curve MCB
• Fully compliant to BSEN61643-11, BSEN62305 & BS7671
• Suitable for domestic/commercial installations
• Space saving 1 module design
• Minimum back-up MCB 32A B curve
• Can be fitted on DIN rail directly into the consumer unit
• Grey colour to match existing circuit protection devices

Data Sheet:

Click Here for Data Sheet

FuseBox Brochure:

Click Here for FuseBox Brochure